Hw100bob 0 Posted May 14, 2015 Report Share Posted May 14, 2015 Can anyone on here tell me who the best weirauch tuners/gunsmiths are ? And is there anyone in scotland ? My hw100 is only making 10.3 ft/lbs with rws super fields. I'd been feeling it was under powered when taking shots at over 30meters so bought a chrono and checked it and was surprised it was so low. I'm not having much luck finding someone up here to help , I'd be happy with it shooting 11.5 any help or advice would be much appreciated guys Quote Link to post
moxy 617 Posted May 14, 2015 Report Share Posted May 14, 2015 This could be of interest if you tinker. http://www.airrifle.co.za/library/HW100_Strip_Down_Guide_Illustrated.pdf Quote Link to post
Rez 4,961 Posted May 14, 2015 Report Share Posted May 14, 2015 Do it yourself man. Seriously. I cannot recommend anything more. It's so easy and you'll come away with more knowledge than you had 1 hour before. 1 Quote Link to post
Hw100bob 0 Posted May 14, 2015 Author Report Share Posted May 14, 2015 Thanks guys I've had the gun stripped but cannot get the anti tamper to move ! Just wasn't keen on messing it or causing damage to it ! I've checked the link moxy (thanks) but mine has a sheer type bolt in it and not an Allen like in the link ! The guns great and very accurate just looking for more power when shooting at 30m + Quote Link to post
Rez 4,961 Posted May 14, 2015 Report Share Posted May 14, 2015 Apologies. I personally mis read your post. Thought you were on about the mechanical side of things. Quote Link to post
Hw100bob 0 Posted May 14, 2015 Author Report Share Posted May 14, 2015 Still interested in getting around the gun tho ! Just Not having any luck getting somewhere up here willing to help ! So good to see guys on here willing to help ! Quote Link to post
moxy 617 Posted May 15, 2015 Report Share Posted May 15, 2015 Are you sure it's not just a blanking cap over the AT? Quote Link to post
charlie caller 3,654 Posted May 15, 2015 Report Share Posted May 15, 2015 Youtube is your friend mate Quote Link to post
villaman 9,982 Posted May 15, 2015 Report Share Posted May 15, 2015 Take the cap of the end ,undo a little grub screw , make a tool to go into the AT like a 10mm bolt with the end cut off and tapered down , heat AT up ,Put tool into drill on reverse and it should come un done I have done a few this way ,works every time or have a look at this 1 Quote Link to post
Hw100bob 0 Posted May 16, 2015 Author Report Share Posted May 16, 2015 Thanks guys , well I took the hammer assembly out and heated up the AT with a torch I've had bolts,Allen keys,spline keys jammed in it and I've even cut a slot in the back of it for a screwdriver and it's solid it just won't move ! So I've ordered a new hammer assembly for it ! Hopefull get it adjusted from there ! Quote Link to post
villaman 9,982 Posted May 16, 2015 Report Share Posted May 16, 2015 The new will be probably the same ,but this one is better http://www.hw100tuning.co.uk/Anti_Tamper_Replacement_Full_KIT/p2174806_9854074.aspx Quote Link to post
Hw100bob 0 Posted May 16, 2015 Author Report Share Posted May 16, 2015 Thanks Looks a good kit , have you fitted one of these ? Can't see how my hammer assembly comes apart Thanks Quote Link to post
villaman 9,982 Posted May 16, 2015 Report Share Posted May 16, 2015 Yes mate I have Quote Link to post
Hw100bob 0 Posted May 16, 2015 Author Report Share Posted May 16, 2015 How does the hammer come apart to fit the adjustable kit ? Quote Link to post
villaman 9,982 Posted May 16, 2015 Report Share Posted May 16, 2015 Have a look at this http://www.hw100tuning.co.uk/index.aspx?pageid=2378866 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.