Jump to content

Think Scope Has Given Up


Recommended Posts

Well I went to my local range today with the hmr to check my zero with the Hornady rounds gone back to them as the cz don't like Remington. Got set up took aim at the 3inch shoot n see target first few shots went just above adjusted and nice 5 shot group so reloaded went to a 1inch target and another nice 5 shot group reloaded went to next 1 inch target first shot went 1inch low thinking it was a flyer had another go and that fell low too cracked next 3 rounds off and they went low and to left so re adjusted back on hit the 1 inch target with another 5 shots went to 2 inch target as it was up again all 5 hit the next five went left this carried on for a bit till I gave up and came home now it can't be the mounts as I as

Got new Bkl Center mounts when I hand wonky mounts and changed mod as old one it came with had burnt out this is the first time the zero has shifted like this has anyone else had a scope just give in on them ?

Link to post

I've broken a couple of Hawke AirMax scopes and a Nikko Stirling AirKing on FAC springers. Apparently, the Hawke one-inch scopes use a leaf spring to hold the erector tube in place, which is less robust than the mechanism in their 30mm scopes. So, even though they're "rated for all calibres", they're not. :hmm:

 

The Targetmaster might use the same construction. If it's under guarantee, they should replace it. If not, it's time for a new scope. If you're on a budget, the Hawke Sport HD is a solid, bright scope that has survived my FAC springers -- so far! :thumbs:

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...