danny bull 4 Posted August 15, 2014 Report Share Posted August 15, 2014 I've just purchased a BSA super 10. When I fill buddy bottle an connect it air leaks from where it screws in. It's not the bottles because I've tried them in my mates gun an there's no leak. Any ideas wat the problem is Quote Link to post
moxy 617 Posted August 15, 2014 Report Share Posted August 15, 2014 http://www.thehuntinglife.com/forums/topic/326211-my-new-mk2-bsa-super-10-a-bugger-to-cock-and-mystery-leak/ Quote Link to post
danny bull 4 Posted August 15, 2014 Author Report Share Posted August 15, 2014 I can hear it leaking out as if I haven't the bottle on tight but I've it screwed in as tight as I can get it Quote Link to post
moxy 617 Posted August 16, 2014 Report Share Posted August 16, 2014 I can hear it leaking out as if I haven't the bottle on tight but I've it screwed in as tight as I can get it Have you replaced and greased the bottle oring? Quote Link to post
mattybugeye 884 Posted August 16, 2014 Report Share Posted August 16, 2014 I had the same problem. Unfortunately mine turned out to be a cracked regulator so I chopped it in against a new gun yesterday. If you are intrested I have a brand new all in packaging full service seal kit for gun regulator and bottle ring with a how to dvd obviously I don't need it any more if you want it pm me 20 posted should cure your Problems IT'S Probably Leaking From Your Reg If Bottle Holds Air Fine But Also What moxy Said Try Bottle O Ring 1 Quote Link to post
zandy01 3,575 Posted August 16, 2014 Report Share Posted August 16, 2014 What's the new gun Matt ??? Don't keep us I'm suspense.... I purchased a mint HW 97KT with Hawke scope on Thursday for £350 - only 6 month old and practically new You may be getting PM re tuning and kit on near future mate Quote Link to post
mattybugeye 884 Posted August 16, 2014 Report Share Posted August 16, 2014 Lol no worries mate just give me a shout will be glad to do it for you . IL give you a clue..... It's got a skeleton stock hehe Sorry for the thread hijack If you remove the stock pull cocking bolt back then refit bottle remove the plate that holds the reg in place with bottle still connected put a little washing up liquid on reg and little water and rub it in it will bubble where the leak is hopefully will just be a seal not cracked like mine Quote Link to post
danny bull 4 Posted August 16, 2014 Author Report Share Posted August 16, 2014 I left it in with a fella this morning for him to look at. Hopefully nothing serious. That's for the input anyway Quote Link to post
mattybugeye 884 Posted August 16, 2014 Report Share Posted August 16, 2014 Fingers crossed he will sort it for you they great guns Quote Link to post
Rez 4,957 Posted August 16, 2014 Report Share Posted August 16, 2014 I had the same problem. Unfortunately mine turned out to be a cracked regulator so I chopped it in against a new gun yesterday. If you are intrested I have a brand new all in packaging full service seal kit for gun regulator and bottle ring with a how to dvd obviously I don't need it any more if you want it pm me 20 posted should cure your Problems IT'S Probably Leaking From Your Reg If Bottle Holds Air Fine But Also What moxy Said Try Bottle O Ring You've got rid of it mate? Quote Link to post
mattybugeye 884 Posted August 16, 2014 Report Share Posted August 16, 2014 Yea unfortunately the reg was in a bad state. Was gutted but ended up with a immaculate falcon fn19 raptor light hunter in .22 so a bad day got good in end Quote Link to post
danny bull 4 Posted September 1, 2014 Author Report Share Posted September 1, 2014 Got gun sorted turns out it was just a seal.. Got all seals replaced an a good clean so already for the bunnys Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.