Wiring A Lure Machine

[fay 75]

cn some 1 please tell me how to wire a switch to a lure machine please

[hounddog3 763]

I think I seen how to do it before on utube .

[fay 75]

im after checking cant find any ting on it just need to no how to wire a switch to it

[squab 2,875]

sure a switch would would just be wired in line from the feed ie battery to the motor,pretty simple id imagine,sure you will get the definitive answer off someone

[fay 75]

im tryng to figure it out but it keeps spining every time i conect it and its sparking so that cant b right lol

[squab 2,875]

you only need to put switch onto the live feed to the motor,i think lol,be suprised if its any more difficult than that,theres a lad on here that makes them sure he would put you right but i cant remember his name might be graham

[fay 75]

i have the negative from motor to battery and positve from motor to switch to battery but still spining somebody must no im brutal at this

[hounddog3 763]

I googled it got a few images up but couldnt work it out most of them use a saliond switch have a look it might help you out.

[fay 75]

ive looked at that dont have 1 of those the machine was working but all the wires where together nd ended up doing someting to them only got this ting last night doing my head in with these wires lol

[whitefeet4190 1,729]

If ur using it from a battery u need some 3 core flex cable or 2.5mm twin and earth cable and u just want a either a double pole isolator switch or just a normal switch would work but depends how professional u want it either will be fine, inside there will be 6 terminals it's just live neutral and earth but 3 of them will say load and that's the wire that comes from the lure machine and the other side will say supply and that's from ur battery, it's pretty much self explantery when u got the bits to do it,

Atb

If u need any help just pm me

[whitefeet4190 1,729]

Just read ur last post u might have the supply and the load wires mixed up

[whitefeet4190 1,729]

Or if it's just a normal switch put the neutrals in a connector block and the live from the battery goes in com at the top of switch and the live from the lure machine goes in L1 or L2 at the bottom of the switch