Jump to content

Bsa Superten - Bolt Stuck


Recommended Posts

Hi there just looking some information regarding my bsa superten. the bolt is stuck and cannot be moved it's probably half way back and won't move at all? Has anyone came across a problem like this before?

Link to post

Was the bolt taken all the way back before it got stuck or was it when you began to try to cock it that it became stuck ?

It was getting really hard to cock for a few times, it was cocking fully but you had to force it and the last time I did it it stuck and won't go any further.

Link to post

Is the rifle currently gassed or loaded ?

Also have you tried using a freeing agent like GT-80 or WD-40 and leaving it overnight with a good soaking.

No the buddy bottle is off the rifle, I will try some WD-40 and see if that makes any difference.

Link to post

 

take the bolt and hammer assembly out mate

Tricky one to do if your not experienced with the Super-10 layout.

I have tried to take the bolt out but it will not come out and I don't really want to force it out.

Link to post

Time to take it to a gunsmith then. I really would advise against spraying WD40 or releasing liquid into the cocking mechanism of any PCP or air rifle! Dieseling could be the least of your worries!

Lol I think the man would have the comman sense to clean his rifle down thoroughly after use.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...