Mtc Mamba Lite

[andy97 209]

is there a way to calibrate these without hours in the fiels similar to chair gun

[magnummike 39]

is there a way to calibrate these without hours in the fiels similar to chair gun

Yes Andy just use Chairgun I have done it for my viper SCB ret just use the half mildot ret 1O x on chairgun . mtc and the hawke rets are true at 1Ox power so will match up mine is spot on out to 7Om

[andy97 209]

 

is there a way to calibrate these without hours in the fiels similar to chair gun

Yes Andy just use Chairgun I have done it for my viper SCB ret just use the half mildot ret 1O x on chairgun . mtc and the hawke rets are true at 1Ox power so will match up mine is spot on out to 7Om

 

that's sound mate nice one ill have a go at that then

[Skot Ruthless Teale 1,701]

Im using a mamba lite on my hw98 and I keep it on 10x so I shall also try this.

thanks

[magnummike 39]

Im using a mamba lite on my hw98 and I keep it on 10x so I shall also try this.

thanks

Hi Skot It will work on what ever mag you use just change to the chosen mag and then look at the ret view in the tool box and the ranges on your half mildots will change accordingly

[andy97 209]

I was just going to ask this so it will work on all mags on half mil dot

[magnummike 39]

I was just going to ask this so it will work on all mags on half mil dot

Yes Andy it will work you just have to change the mag then look at the ret view , as long as your mildots are true at 1Ox or 2Ox as hawke scopes are , as your MTC scb is true on 1Ox hope this helps Mike Oh just thought on the Scb ret the first half mil is the bottom of the cross then there is a small gap to the next post which is .75 of a mil the next cross bar is the full mil

[Skot Ruthless Teale 1,701]

haven't really used chairgun all that much so forgot a lot of what I knew about it, just need to refresh y memory a bit.

 

but I was shooting at 34 to zero then 50 yards other day and after I shot the group at 50 I forgot to look through the scope and write down the mildots LOL

 

I will calibrate it all one day when I can be arsed lol, but its mainly a target rifle for me anyways so doesn't really matter.

 

need to do my hw100 properly tho that's my hunting rig so need it calibrated bang on as its a .22.

 

cheers lads

[andy97 209]

well that's what mine is on a 22 so need it to be spot on gunna go 2morra and do it properly

[Craig83 52]

Try Istrelok if you have a IPhone, it shows you all the hold overs for pretty much every ret