porkybella 284 Posted June 16, 2013 Report Share Posted June 16, 2013 Hi im after some rifle sling swivels for my 97k i obiously need a screw in one on the back of the stock but can someone please tell me the size of the barrel band for the underlever at the front of the rifle. Ive measured it with the verneer calipers and says it 13.90mm and will the bisley swivels fit at 13.5mm cheers for advice porky Quote Link to post
Skot Ruthless Teale 1,701 Posted June 16, 2013 Report Share Posted June 16, 2013 I have bisley 13.5 on mine and they sit nice. you could get the 15mm and put a bit of tape under them Quote Link to post
porkybella 284 Posted June 16, 2013 Author Report Share Posted June 16, 2013 Ill get the 13.5 cheers skot Quote Link to post
Skot Ruthless Teale 1,701 Posted June 16, 2013 Report Share Posted June 16, 2013 don't have a close up [ pic mate but heres one can pick it up and swing it round all day and it has never budget at all. Quote Link to post
davyt63 1,845 Posted June 16, 2013 Report Share Posted June 16, 2013 hi Rob the 13.5 will be fine buddy,thats what i have on mine Quote Link to post
Wildling 520 Posted June 16, 2013 Report Share Posted June 16, 2013 Just out of interest lads but won't the metalwork get marked by clamping a sling swivel to it ? I've always fancied putting a sling on my HW 77 but have always been put off by this thought. Quote Link to post
porkybella 284 Posted June 19, 2013 Author Report Share Posted June 19, 2013 Davy wait to you see the sling i got on order should have it by the weekend Quote Link to post
Miikee-L 72 Posted June 19, 2013 Report Share Posted June 19, 2013 (edited) Just out of interest lads but won't the metalwork get marked by clamping a sling swivel to it ? I've always fancied putting a sling on my HW 77 but have always been put off by this thought. I dont know if it would work because i don't have a springer myself (yet) but if you put a bit of black electrical tape just where the clap attaches the under leaver wouldn't this be sufficient to protect it? Edit...Sorry just noticed scot already suggested this! I have bisley 13.5 on mine and they sit nice. you could get the 15mm and put a bit of tape under them Edited June 19, 2013 by Miikee-L Quote Link to post
porkybella 284 Posted June 20, 2013 Author Report Share Posted June 20, 2013 Fitted them just. Never bovered with the electrical tape they are solid and dont seem like they wanna budge. Cheers lads 1 Quote Link to post
goz1960 52 Posted June 20, 2013 Report Share Posted June 20, 2013 Just the question I was going to ask, ready made answer. Quote Link to post
leaky5 2 Posted June 20, 2013 Report Share Posted June 20, 2013 I sometimes get asked about alternatives to barrel or under lever mounts. I have found that these will replace one of the front stock screws on a HW95. http://www.ebay.co.uk/itm/400471943360?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649 The chambers part number is the same for the 77 and the 95. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.