Froudy 40 Posted March 8, 2013 Report Share Posted March 8, 2013 Hi lads, Just wondering if anyone can recommend a good fogger for the use against cluster flies, in small and big attic spaces? Atb Froudy Quote Link to post
Matt 160 Posted March 8, 2013 Report Share Posted March 8, 2013 B&G Flexilite. Anything else is an expensive waste of money designed to rip you off for product. Quote Link to post
mole trapper 1,646 Posted March 10, 2013 Report Share Posted March 10, 2013 Yep, like Matt said! I love my b+g it can seriously chuck out, I've actually had customers comment they thought the roof tiles were going to be blown off by it when they hear me with it in the loft. Holds lots of chemical, way more than you will ever need on a job, Even if you were fogging the Albert hall. Quote Link to post
budgie123 163 Posted March 10, 2013 Report Share Posted March 10, 2013 Been using the microgen for 10 years machine has never missed a beat. Quote Link to post
Matt 160 Posted March 10, 2013 Report Share Posted March 10, 2013 Been using the microgen for 10 years machine has never missed a beat. You are lucky then. Mine did 3 years before the motor burnt out. A new motor was more than a new B&G machine, and the big advantage of the B&G is that you can put any (approved for fogging ULV) product through it without being tied to the special bottles that cost extra. I think the longest I've had the B&G on in a domestic property was 30 seconds. I generally use Aquapy, and it gives a very good knockdown. Remote controlled machines are cumbersome and unnecessary; most jobs only need less than a minute, and you still need a mask to recover the machine even if you switch it on from outside the treatment area. The other thing with the B&G is that you can vary the application rate, which means that you can apply some preparations at ULV rates, or you can fog with biocide or whatever you choose. You don't get that flexibility with a Microgen. And then there is the initial cost. A B&G is less than 3 hundred, but a Microgen is over 5. Quote Link to post
mole trapper 1,646 Posted March 11, 2013 Report Share Posted March 11, 2013 Pybuthrin 33 for me! Quote Link to post
budgie123 163 Posted March 11, 2013 Report Share Posted March 11, 2013 In the department where i work everyone uses the microgen machine and to my knowledge there has been no issue with anyones machine and some of the other officers have been there over 10 years and are still using original machines they were given. One thing i was made aware of when trianing is to ensure machine is kept away from products such as loft insulation to prevent it being succed into machine leading to premature fialure. With regard the bottles of insecticide used my personal opinion is they are cost affective. No matter how good you are at mixing quantities of products for a specific job there will invariably be some waste. With the bottles for the microgen there is no waste and if used as specified with the calculations for product for given area it is very very cost affective with no waste at all. If you look on the pest control forum froudy under flea treatments on the insect section there is the formulea. If you are not familiar with fogging it will pay to look at this to ensure you are not overdosing and wasting insecticide and not using the product in contravention of the label dosing rates.You will be amazed how many treatments you get from one bottle of insecticide if used correctly. Quote Link to post
d6k 11 Posted March 12, 2013 Report Share Posted March 12, 2013 This is a clip of the b&g in action, however this was its last outing it packed in at the end of this job. Quote Link to post
Fidgety 8 Posted April 5, 2013 Report Share Posted April 5, 2013 I use the SX micro fogger for the rare occasion I need one....does everything I want Quote Link to post
TWOTWOTHREE 152 Posted April 7, 2013 Report Share Posted April 7, 2013 (edited) SOLD would admin kindly remove this atb 223 Edited April 17, 2013 by TWOTWOTHREE Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.