AirgunGuy 362 Posted October 20, 2012 Report Share Posted October 20, 2012 The felt that is used in the original can be replaced. Simply strip the mod and all you're doing is replacing the original felt with a thinner felt. If you can get felt that is approx 2mm thick...cut it into approx 8 inch strips the same width as the ally tubes and roll the tubes fairly tight with the felt. It helps if you roll it on a hard surface with someone putting a little pressure on the end of the felt as you roll. When putting it all back together, it should be a tightish fit. As long as it isn't too tight and the felt doesn't push back on itself as you insert them in. It certainly made a difference to mine. From a few yards away all that can be heard is the action on firing. You can get the craft type felt from ebay for a couple of quid. I'll try get a couple of pics up tomorrow Quote Link to post
chris k 205 Posted October 21, 2012 Report Share Posted October 21, 2012 hhmmm might have to check this out Quote Link to post
riflehunter583 58 Posted October 21, 2012 Author Report Share Posted October 21, 2012 when i got the twink (year ago) there was a baffle right at the front near the barrel end just off the unf thread. but sadly the baffle broke into small parts so i sent it back and it came back removed. even with this removed baffle, on the wolf i can only hear the action if the gun is set to say 11-13ftlbs. i would be interested to see how the twink compaired to the decemator mod. becuase its shorter than the decemator i belive. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.