Wxm 1,638 Posted September 19, 2012 Report Share Posted September 19, 2012 i did a deal for my 97k for a bsa scorpion t-10 and think (know) i've had a dud deal but ahh well you cant win them all anyways when you cock it, it will skip from slot 1 to slot 10 or skip 1 or 2 or 3. or it wont even move :hmm: i've got a mate with an ultra and im going to try his mag as i've been told it might just be the mag, so its got to be worth a try. also i took the stock off to to find out that the safety has snapped so need a few bits doing to it. where would be the best place to send it to get fixed?? or where could i get the parts to have a wee look myself. dont get me wrong its a lovely gun but at the min you be safer throwing it at a rabbit rather than guessing if its loaded or not :blink: cheers in advance Quote Link to post
Lewis Ste 245 Posted September 19, 2012 Report Share Posted September 19, 2012 The old mags have always had index problems my ultras does it it will skip the 4th one then not cycle on the 7th 8th 9th just buy a new mag and it should be fine and as for the safety the BSAs are the most simple safety's going if you bought a new one you could probably fit it yourself. I took apart the air cylinder on mine to sort a valve problem out. If you have any problems give xtx a call he's a very helpful man! Have you also tried the BSAog forum? Quote Link to post
ArchieHood 3,692 Posted September 19, 2012 Report Share Posted September 19, 2012 Sounds like the mag may need stripping down and cleaning or maybe an indexing problem.......... as for spares..................http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24857&cat=Scorpion+T%2D10+PCP Hope this helps. Quote Link to post
Wxm 1,638 Posted September 19, 2012 Author Report Share Posted September 19, 2012 The old mags have always had index problems my ultras does it it will skip the 4th one then not cycle on the 7th 8th 9th just buy a new mag and it should be fine and as for the safety the BSAs are the most simple safety's going if you bought a new one you could probably fit it yourself. I took apart the air cylinder on mine to sort a valve problem out. If you have any problems give xtx a call he's a very helpful man! Have you also tried the BSAog forum? cheer mate its a nice wee gun just wish i had have known more not to have got bitten on it but it will come good. is this the forum> www.airgunbbs.com ?? cheers Sounds like the mag may need stripping down and cleaning or maybe an indexing problem.......... http://youtu.be/bHH514soeNQ as for spares..................http://www.gunspares...orpion T-10 PCP Hope this helps. cheers that chambers seems a decent chap / site. i didnt think to look on youtube for vids :thumbs: cheers Quote Link to post
villaman 9,982 Posted September 19, 2012 Report Share Posted September 19, 2012 Hi You will not go wrong with XTX AIR ( Darrin) he is one of the best people on the BSA PCP. Quote Link to post
Lewis Ste 245 Posted September 19, 2012 Report Share Posted September 19, 2012 http://bsaog.co.uk/forum/index.php Quote Link to post
silentshot1 206 Posted September 20, 2012 Report Share Posted September 20, 2012 Hi You will not go wrong with XTX AIR ( Darrin) he is one of the best people on the BSA PCP. Couldn't agree more. His services are well worth the money and his his honest, open opinion can be relied upon. couldn't recommend him high enough. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.