Jump to content

Recommended Posts

hi all last christmas i swapped a 400 for a pro sport thought i would treat it to a v-mach kit ! have been well happy had it set at 11.2 with daystate 7.9 grain pellets, any way chronoed it today as on here i have read the power creeps up, well its down to 9.6 with daystate 7.9 grain an 10.6 with aa fields 8.4 grain gutted . i stripped it down it all looks fine cleaned it up regreased it an put another washer in it to raise the power ! chronoed it again no change put the old breach seals in no change. any one got a clue i am well pissed off the seal looks fine. help any one please.

Edited by fry
Link to post

Hi mate.

If nothing else, send my pal AndyFR1968 a PM about this. He's been a bloody wizard with servicing and tuning my spring rifles, so, it's a good bet he might know what's happening inside your Prosport...or not!

 

 

Hope this turns out well for you and your rifle.

 

Regards.

 

Simon.

Link to post

erm. doodgy chrono.. wrong pellet weight in chrono settings??

 

other than that if it all looks ok then god knows. 9ftlb is still effective tho.. dont get too worried about the numbers mate it will screw with your head, like mine has been since i started worrying too much about all the little things. go out, shoot some stuff and have fun and stop worrying about numbers is my advice :)

  • Like 1
Link to post

yeah well i changed the batteries in it and it was the same detinately not put in wrong weights. i will try my 410 through it see if thats reads under as well. i have been thinking about it and if there is a fault it must be losing past the piston seal the spring is new. all said and done i only have a combro. i will ring blackpool rifles and ask them what they reckon.

Link to post

hi fry

what grease are you using?

i wouldn't worry to much about the 10.6 with AA 8.4gr ,it will bed in and after a few tins it will be cock on!

i run my TX at 10.2 and its deadly accurate,so just let it settle and every thing will be OK :thumbs:

Link to post

i used the grease that came with the v-mach kit i aint too bothered over the ten with the aa fields but under with the 7.9 daystates sort of grates a bit. any way my missis is off to corfu with all the kids to aqua land for ten days so i am going to service me 410 with the dvd you sent me when they are gone. will leave a review after i am done..

Link to post

tried to put a third preload washer in an it would not cock! phoned mr pope and he said shorten the plastic spring guides which i did but to no avail. it must be a duff spring me chrono is right my 410 still reads 11.2. he has told me to send him the spring and he will send a replacement. cant say fairer than that! my spring measured 208 mm an one he had there was 215mm. o well back to the recoiless world of pcp s for a week. have to say steve pope is a decent fella to deal with.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...