cz 22lr

[heski 0]

bought a cz about a month ago and am well pleased with it apart from the trigger pull on it,i have read about trigger kits you can get for it and was wondering where i would get one from as my local shop does not stock them,any help would be appreciated,

[TWOTWOTHREE 152]

Think there is a place at Rotherham called rimfire magic, they have a web site cheers 223

[TWOTWOTHREE 152]

It's Barnsley mate number is 01226 756332 cheers 223

[heski 0]

It's Barnsley mate number is 01226 756332 cheers 223

cheers just been on website and found them,will get one ordered tueday,,thanks for the help

[gilloverland 0]

http://www.rimfirecentral.com/forums/showthread.php?t=197288 or

 

http://www.rimfirecentral.com/forums/showthread.php?t=330293

[sibaldib 6]

There's a very good video on YouTube that shows how to install your new kit. I've fitted one to my CZ .22LR and CZ .17HMR and it makes a huge difference.

 

 

Cheers

 

Sib

[PLEDGEY 496]

I have 2 CZ 452's. 1 in.22LR the other 17HMR. Both are fitted with trigger kits i got off of Ebay. They each cost £11.08 with £3.09 P+P. They came from Canada but only took a week to arrive. They are worth every penny, makes the guns so much better to shoot. I used a drill bit to punch out the pins. The other thing you might want to do while you have the stock off is check that the barrel is floating. I gave my HMR a sanding down, while i had the stock off doing the trigger, and it groups much better.

[raynardman 519]

I bought the exact kit from rimfire magic for my cz, takes about 15 mins to fit and does the job whats required of them. "BUT" just be wary, you get 2 tubes of different gauge to fit over the pin and you get 3 springs in different strenghts, if you set it too keen it can and does go off by tapping the butt on the ground. It does make it a whole lot better and would definately recommend buying it.

[Hywel 53]

I bought the exact kit from rimfire magic for my cz, takes about 15 mins to fit and does the job whats required of them. "BUT" just be wary, you get 2 tubes of different gauge to fit over the pin and you get 3 springs in different strenghts, if you set it too keen it can and does go off by tapping the butt on the ground. It does make it a whole lot better and would definately recommend buying it.

 

I will be speaking further to you about this, as I will be buying a CZ .22LR in the near future

[paulus 26]

the kit i got from canada had a rake of tubes and springs fitted it no problems just cock the rifle and bump the stock on the floor or tap with a rubber mallet to test before loadind with a live round.

[Rake aboot 4,936]

Rimfire magic kit,,,superb!! transforms the gun,,