jasper65 6 Posted February 22, 2010 Report Share Posted February 22, 2010 Can anyone recommend some hard wearing Black Matt spray I could use if I wanted to tidy up my silencer? the silencer fitted on the gun already has a fair few scrapes and scratches on it so I fancied like stripping it and re-spraying the unit....... At the moment it looks like its been in a War zone cheers Jasper Quote Link to post
Malt 379 Posted February 22, 2010 Report Share Posted February 22, 2010 You can get that plasti kote spray on stuff Jasp, it's meant to be tough as hell. I think you can get spray on hammerite too, never used either personally though! http://www.diy.com/diy/jsp/bq/nav.jsp?action=detail&fh_secondid=9788844&ecamp=trf-005&CAWELAID=266954829 ...and there's the stuff you can use on exhaust manifolds, etc, not sure what it's called. Quote Link to post
garfield 23 Posted February 22, 2010 Report Share Posted February 22, 2010 try a piece of bike innertube Quote Link to post
jasper65 6 Posted February 23, 2010 Author Report Share Posted February 23, 2010 Cheers Lads for the replies . looks like some good stuff there Malt! I'll get it sprayed up and stick a bit of bike tube over it like Garfiled mentioned to protect it a bit........ Jasper Quote Link to post
Buster321c 1,010 Posted February 23, 2010 Report Share Posted February 23, 2010 Most matt paints really aint that `Matt` . Ive doen it myself several times and sprayed the silencer , but its never really a matt finish . I would`nt worry to much Jasp , just give it a spray , no doubt you`ll end up doing it again ,atb Bust . Quote Link to post
festa 206 Posted February 23, 2010 Report Share Posted February 23, 2010 try a piece of bike innertube :clapper: thats what ive done works great atb gary Quote Link to post
davyt63 1,845 Posted February 23, 2010 Report Share Posted February 23, 2010 Most matt paints really aint that `Matt` . Ive doen it myself several times and sprayed the silencer , but its never really a matt finish . I would`nt worry to much Jasp , just give it a spray , no doubt you`ll end up doing it again ,atb Bust . i bet you have bustie!! Quote Link to post
Buster321c 1,010 Posted February 23, 2010 Report Share Posted February 23, 2010 OI Cheeky Quote Link to post
davyt63 1,845 Posted February 23, 2010 Report Share Posted February 23, 2010 OI Cheeky did ya see my reply on AAOC Quote Link to post
wrowmon 1 Posted February 23, 2010 Report Share Posted February 23, 2010 i use ultra high temp matt black paint its meant for pot belly stoves etc but it gives a good coverage and is very flat ,£9.00 a tin.but you need to layer it and leave it for a day to dry.. Quote Link to post
davyt63 1,845 Posted February 23, 2010 Report Share Posted February 23, 2010 i use ultra high temp matt black paint its meant for pot belly stoves etc but it gives a good coverage and is very flat ,£9.00 a tin.but you need to layer it and leave it for a day to dry.. hi ww do you apply a primer first! regards davy Quote Link to post
wrowmon 1 Posted February 23, 2010 Report Share Posted February 23, 2010 i use ultra high temp matt black paint its meant for pot belly stoves etc but it gives a good coverage and is very flat ,£9.00 a tin.but you need to layer it and leave it for a day to dry.. hi ww do you apply a primer first! regards davy no i don't used to then found the primer lifted but this stuff is made to stick to cast iron so it does not need one just layer the ugger on... Quote Link to post
wrowmon 1 Posted February 23, 2010 Report Share Posted February 23, 2010 and then when the wife is out pop the silencer in the oven at about 120 for 20mins...hehe Quote Link to post
Buster321c 1,010 Posted February 23, 2010 Report Share Posted February 23, 2010 OI Cheeky did ya see my reply on AAOC No but im gonna have a bloody look now Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.