hairyface 211 Posted January 8, 2010 Report Share Posted January 8, 2010 just been out with a mate and his .223, just driving some of his fields, anyhow he stops saying he needs to take a piss, so he gets out removes the mag an sets the gun on its bipod on the roof of his jeep,he takes his piss and starts talking about something else, he jumps in and sets off, i shout him "yer guns on the roof" just then it bounces down onto the bonnet then off onto the ground,he stops just short of running it over, anyhow after he stomps about abit we decide to set a target up and see what the sight are like,needless to say we missed the target altogether, so his question to me was "will the sights just need setting up again or will they be f****d, like proper f****d" so what do you think fellas?? Quote Link to post
waidmann 105 Posted January 8, 2010 Report Share Posted January 8, 2010 try to zero again it may just be knocked off( tighten screws and do it in a SAFE place as you cannot be sure).bore sighting may be a good start. if its not damaged( prism,glas,body)try it.if it is get it away to be checked over/repair. good luck. Quote Link to post
Deker 3,491 Posted January 8, 2010 Report Share Posted January 8, 2010 Check the WHOLE Rifle very carefully, if all seems ok by all means test fire and try to re zero, and just keep your fingers crossed! Quote Link to post
martin 332 Posted January 8, 2010 Report Share Posted January 8, 2010 What is the scope? Quote Link to post
hairyface 211 Posted January 9, 2010 Author Report Share Posted January 9, 2010 What is the scope? its a bushnell he's got mate, 6-18 x 50 dusk/dawn, someone suggested the barrell might be bent, are they easy to bend,its a tikka t3 with a t8 silencer Quote Link to post
smasher 1,055 Posted January 9, 2010 Report Share Posted January 9, 2010 What is the scope? its the thing you look through that goes on top of the rifle.[sorry i couldn't resist it] Quote Link to post
mattydski 560 Posted January 9, 2010 Report Share Posted January 9, 2010 What is the scope? its a bushnell he's got mate, 6-18 x 50 dusk/dawn, someone suggested the barrell might be bent, are they easy to bend,its a tikka t3 with a t8 silencer Yes.. Also check the woodwork isn't split. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.