Waz 4,293 Posted August 14, 2009 Report Share Posted August 14, 2009 (edited) Give the collar a scrub earlier, and noticed the 'o' ring had gone. The casing is the second one from B&F, the first was a different harder plastic/resin and as a lot of people might have experienced is too brittle round where you screw it up. This newer softer model dont have that problem. Have kept an eye on this as at the end of the day the dog is relying on you getting down to him (if no bolt etc). Still the original collar though. I do like this material its strong stuff and standing upto to testing conditions ive complete confidence in it (touch wood). Washes up almost brand new, dont absorb liquid. Couple of bite marks/abrasions, not an issue. Would be good to see the newer collar, anyone had their mitts on one yet? Edited August 14, 2009 by GD Waz Quote Link to post
Guest busterdog Posted August 14, 2009 Report Share Posted August 14, 2009 Seen them being tested and they are spot on waz. Quote Link to post
chilli 381 Posted August 15, 2009 Report Share Posted August 15, 2009 Seen them being tested and they are spot on waz. Same hear seen them been tested , spot on . will get 1 when they come out . Quote Link to post
dog fox 16 Posted August 15, 2009 Report Share Posted August 15, 2009 i heared they were going to test the new collar to a thousnd digs or something before they were going to release it ,any one know how many there up to as it could take quite a while Quote Link to post
jessdale 416 Posted August 15, 2009 Report Share Posted August 15, 2009 i heared they were going to test the new collar to a thousnd digs or something before they were going to release it ,any one know how many there up to as it could take quite a while The collar was with a friend of mine all last season.You can rest assured that it has been dug to more times than most of the collars will ever see in their life times . Quote Link to post
andrew mark 21 12 Posted August 16, 2009 Report Share Posted August 16, 2009 Give the collar a scrub earlier, and noticed the 'o' ring had gone. The casing is the second one from B&F, the first was a different harder plastic/resin and as a lot of people might have experienced is too brittle round where you screw it up. This newer softer model dont have that problem. Have kept an eye on this as at the end of the day the dog is relying on you getting down to him (if no bolt etc). Still the original collar though. I do like this material its strong stuff and standing upto to testing conditions ive complete confidence in it (touch wood). Washes up almost brand new, dont absorb liquid. Couple of bite marks/abrasions, not an issue. Would be good to see the newer collar, anyone had their mitts on one yet? any pics of now one Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.