Jump to content


Photo
* * * * * 5 votes

Step by step guide to butchering a deer..........


  • Please log in to reply
57 replies to this topic

#1 martin

martin

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 4,176 posts
  • Location:Somerset/Wiltshire Border

Posted 16 January 2009 - 09:20 PM

Step by step guide to butchering a deer.......

Postby re'M'ington on Mon Jan 12, 2009 5:49 pm
Right,I have put this together so it might be of help to someone while they are trying to butcher their Deer,this is a Roe in the pics,but,it would be exactly the same for all species of Deer,and,it just as easily be used on Lambs/Goats/Pigs.I have done this one with a view to using all of the fore meat for sausages,but,if you wanted to have casseroles,all you would need to do is to dice up the fore meat and bag in as big a lots as you would need to use on the day.
As I started to do this beast I was on my own,so,the skinning isn't very well illustrated,but,I will try to do another when I get one,and,have someone else take the pics.I was luckier later as I had help with the pics...........thanks Mum.

Step one...........
skin the animal
If you carefully cut around the top of the leg at the large joint(should be obvious)and then cut from the open cavity up towards the large joint keeping the knife just under the skin,and facing outwards as in the pic...
Posted Image
and then you need to pinch the skin at the open cavity until you have an edge,and work your fingers/hand inbetween the carcase and the skin
Posted Image
,it should come off quite easily,so,just keep working your fist/knuckles into the skin,and,work upwards.When you have released the rear legs from the skin you just start to pull downwards still working the fist/knuckles inbetween to help it keep coming off.As you get to the forelegs you need to do the same as you did at the rear legs......put your knife under the skin facing outwards and run it down the leg towards the knuckle,you may have to ease the skin off woth the aid of a knife just nicking the vellum inbetween the carcase and the hide as you go.Once you have cleared both of the forelegs,you just need to pull the skin on down and off at the neck.
You are then left with a naked deer ready to butcher,and,the first part in what I like to call the disassembly is to remove the fore,and,for this you will need a butchers saw/hacksaw.You will have the carcase laid on its back,and,if you move the foreleg around you will be able to see the blade bone moving under the flesh,and,this is where you need to saw from the top right down in a straight line to the bottom,and you will be left with the fore as in the pic........
Posted Image
Put this aside for the moment,as we will be removing the bellies next,now,like a fool I didn't take a pic of me sawing the bellies off,but,here is what you need to cut off.....
Posted Image
and,this is what you will now be left with when you put the bellies with the fore(for the moment)
Posted Image
You now have the inner fillets/tenderloins to remove,they lie either side of the back bone,and feather down to a point towards the front of the animal.If you place the knife tight up against the spine and run it up the spine towards the haunch,all the time pulling the fillet away from the spine,you also need to carefully ease the knife across the vertabrae totally releasing the fillet as you go.....
Posted Image
It doesn't take any force at all,and comes away very easily........
Posted Image
It should be obvious when you come to the end of the fillet,and,then you just cut it off........
Posted Image
The fillet will be covered in a gristly fatty covering..........
Posted Image
You now have to remove the covering,and,this can be done with you fingers....
Posted Image
if you peel it off you are then left with a lovely piece of meat(albeit smallish)that will cook lovely,and,I usually fry it and have it in a sandwich(but then again,I am a heathen...lol).....
Posted Image
I usually have two dogs by my side while I am doing this and they get the fatty covering as a treat.
You should now be left with a piece of carcase just like this.......
Posted Image
but,without the fillets.........
Posted Image
Now there is a bit more intricate part,but,don't worry,because it is really easy,to take off the haunches you need to find a line that is between the loin and the haunch,and,it is very easy to see,here it is.............
Posted Image
it is a curved line formed by a small line of fat,and,you use that line as a cutting line,you are aiming to go around the end of the aitchbone,and,back towards the tail line........
Posted Image
Posted Image
And,the same for the other side.........
Posted Image
You will then have a cut line just like this..........
Posted Image
When you are at this point,you now need to turn the carcase over onto it's back again,and there is a large joint in the spine that would correspond to where the cut line met in the middle on the other side.It is the last joint before the spine drops away down into the anal cavity,you need to put your knife through this joint
Posted Image
,and,don't worry it is quite easy if you raise and lower the the legs as you try to open up the joint as much as you can.You won't get right through,so,you then need to just bend the carcases back to break the joint..........
Posted Image
Posted Image
Just snip the little bit that holds it together,and,you are then left with your haunches,
Posted Image
and saddle
Posted Image
Now you turn the saddle over so the rib bones are on the block/worktop and you will see a loose flap of meat at the rib end,so you need to peel this back and carefully remove it with the knife...
Posted Image
You are then left with what you probably know as the backstraps that need to be removed from the rib cage,so,you run the knife carefully along the line of the spine,but just to one side.Use the tip of the knife only and slowly feel yourself along the side of the fins on the vertabrae.......
Posted Image
Posted Image
Posted Image
As you get to the point where the backstrap has been released from the fins,you then need to remove it from the ribs etc. so,starting at te rib end,there are some button bones that you can bone around if you want to bother,they are small,and if you do try to bone around them watch your fingers as you will need to have them near to the blade...........
Posted Image
As I give all of the bones to the dogs(apart from the leg bones as they can be a bit splintery)I don't normally bother to bone around them,but,if I was doing it for someone else,or to sell per pound I would.If you just use the very tip of the knife and carefully follow the rib bones the backstrap will slowly be released........
Posted Image
At the loin end you have fins instead of ribs,but,as I said,if you just use the very tip of the blade you will be able to follow them easily..........
Posted Image
Do the same to the other side,and discard the bones.......
Posted Image
Posted Image
You now have to of the best pieces of venison there is in front of you,but,there is a gristly membrane that covers them,and,this needs to be removed.If you put your knifetip under this membrane,just to give you a starting point,
Posted Image
you can pinch the end while working the knife carefully under it and edging it down the length with the cutting edge of the knife facing into the membrane.........
Posted Image
Posted Image
Posted Image
remove this membrane completely,and,you are then left with the 'Creme de la Creme',this is usually used as butterfly steaks,and, it is bloody lovely.......
Posted Image
Now at this point I had a little friend join me to see what I was up to.......a 'Ked' Uurgh!
Posted Image
Quickly despatched,I carried on......lol
Posted Image
We now return to the haunches,and,as they are still attatched to each other,so,firstly we need to seperate them.The haunches are attatched by the tailbone and the aitchbone,and,I like to be a little clever here,and,do it without a saw,but,you may of already split the aitches in the field(I don't),So if you lightly run the boning knife across the middle of the aitches there is a cartledge joint inbetween,and,when you find this,you just get a heavy knife and push it through.....
Posted Image
After the aitches are split it is only the tail left holding it together,so,if you are careful you will be able to feel to the right of the large joint in the spine there is another cartledge joint,don't push too hard...just ease it through,it will go through VERY easily if you are in the right place....
Posted Image
Do this on both sides and you will be left with this......
Posted Image
here is a close up of the tail bone which might make it easier to find the joints........
Posted Image
Next you need to remove the bones from both of the haunches,firstly cut the achiles tendon
Posted Image
I then cut between the lower leg bone and what would be their thigh bone,you will see there is a light patch(more cartledge)just where the joint is,it will take a bit of practice to get this right,but,as long as you don't try to push too hard,and you put a small amount of pressure on the bend of the joint you will eventually get inbetween the two bones.......
Posted Image
Posted Image
Posted Image
When you gat to this point it should be a fairly easy job to run the(and don't forget this!!)very tip of the knife down the lower leg bone to start to remove the lower bone altogether.........
Posted Image
Posted Image
Posted Image
Posted Image
We then spin the haunch around and start to remove the aitchbone,this is a ball and socket joint,and it is VERY tight,so watch your fingers.
Posted Image
Start off by easing your knife in behind the bone,and,try to keep the tip of the knife tight against the bone,as it is a funny shape.........
Posted Image
You will get to a point where you think it won't go any farther,and,that is when you will be up against the ball and socket joint,you need to cut the ligament between the joint,and then it will open up.........
Posted Image
Posted Image
Posted Image
At this stage it is easy to just ease the meat away from the aitchbone,and,drop it down to your waitng dog...lol
Posted Image
There is now just the one main bone left and the small button bone at the other end.You have exposed the ball part of the joint and the other end as well,so,if you imagine a line between the two you have an idea where the bone is under the meat,so,run the knife along that line and expose the thigh bone........
Posted Image
Posted Image
Then you do as you did to the lower leg bone,you just ease the knife carefully around the bone,and remove it from the haunch.....
Posted Image
Posted Image
Right,once the bone is out,you should be able to see the button bone
Posted Image
,and,this you just cut around,and remove it
Posted Image
,and then you have this left........
Posted Image
The piece of muscle that I have in my hand on the last pic then needs to be taken out,you can almost do this with your bare hands,but,will just need to ease it out with the knife......
Posted Image
This will probably come out in two pieces,so after it is removed totally your haunch should look like this..........
Posted Image
the lower muscle goes for casserole/sausages and we then roll and tie the haunch.I use a couple of old skewers to hold it in place while i tie it.I haven't shown you how to do the butchers knot as I didn't want to over compicate things,any knot will do,but a slip knot with a half hitch to hold it is best.............
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Then bag/mark and freeze..........
Posted Image
Now we are getting there,and we only have the fore and the bellies left to do.The bellies I use for sausages,so just trim the loose boneless flap off,and give the meaty bones to the dogs......
Posted Image
The last lap now,and,we are on the fore,which I use for sausages,but,you may want to use for casserole meat,or even roast the shoulder like a shoulder of lamb.I firstly remove the front legs along with the blade bones like this...........
Posted Image
Posted Image
Posted Image
Posted Image
It is then a lot easier to remove the bones like this,as it is easier to manouver on the block.As with all of the other bones you will have removed,just use the tip of the knife,to feel your way around them,you can take them out as one or individually if you prefer......
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
Posted Image
At this point just expose the blade bone by running the knife across the blade flat to the bone,and,cut through the ball and socket joint as you did earlier...
Posted Image
Posted Image
On the reverse of the blade bone is a sort of sail(for want of a better word)so try to get around this with your fingers as best as you can,and then cut it cleanly out.......
Posted Image
Here is an exploded view of the bones in the foreleg and blade bone.....
Posted Image
This should help you to see what you are trying to get out before you start.When you have done the other one then we have the neck and what is left of the ribcage with the breast bone still attatched,and,as I have the dogs,I tend not to take these bones out very clean,and,just strip off the bulk of the flesh,agian for sausages..........
breast bone removed....
Posted Image
And,the meat removed from the neck/ribcage.......
Posted Image
Here are all of the bones ready to feed to the dogs(some of which I freeze down)...
Posted Image
And here is an alternative to taking off the backstraps for those that like chops,I just sawed across the saddle to make some really nice thick double chops......mmmmmmmmmm!
Posted Image

And that is as they say IT!!! And,it all started out looking like this..................
Posted Image
I do hope this will be of some help to some of you,and,if you have any questions please ask away.............Martin.

This post has been promoted to an article
  • bullmastiff, whippet 99, Carraghs Gem and 3 others like this

#2 SNAP SHOT

SNAP SHOT

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 5,826 posts
  • Location:FAR FAR AWAY...............I THINK

Posted 16 January 2009 - 09:35 PM

Well done again martin, :notworthy: :laugh:

#3 SportingShooter

SportingShooter

    The Miscellaneous Mod

  • Moderator
  • 5,531 posts
  • Location:South West Wales

Posted 16 January 2009 - 09:35 PM

Excellent stuff as ever Martin.

Realy, Really useful. It deserves to be pinned :yes:

Well done mate. :thumbs:

#4 bosco

bosco

    Born Hunter

  • Members
  • PipPipPip
  • 291 posts
  • Location:space i think

Posted 16 January 2009 - 09:43 PM

that was really good . top job very good knife work fair play to you

#5 Guest_TERRIERCENTRAL_*

Guest_TERRIERCENTRAL_*
  • Guests

Posted 16 January 2009 - 09:48 PM

well done that will help a lot of members i no it will help me in the future

thanks mate
  • maggot likes this

#6 Paddywoodcock

Paddywoodcock

    Born Hunter

  • Members
  • PipPipPip
  • 50 posts
  • Location:Dublin

Posted 16 January 2009 - 09:49 PM

Excellent job! Thank you Martin

#7 paddy31

paddy31

    Born Hunter

  • Members
  • PipPipPip
  • 238 posts

Posted 17 January 2009 - 12:03 PM

Spot on Martin fiar dues to you that took a lot of time and effort to put up in such detail great post.
Regards Paddy31

#8 yorksjt

yorksjt

    Born Hunter

  • Members
  • PipPipPip
  • 124 posts
  • Location:Yorkshire

Posted 17 January 2009 - 02:31 PM

Nice write up, really useful.

#9 foxdropper

foxdropper

    Extreme Hunter

  • Donator
  • 5,166 posts
  • Location:Wiltshire

Posted 17 January 2009 - 06:22 PM

Christ mate fair play to you .If i attempted that it wouldnt look nowt like it mate .No patience for the finer detail me but i know a perfectionist when i see one .I will get you to do one for me ,been a long time since i actually ate the stuff rather than taking them over the dealer .Again fair play to you on the post which as said ,deserves to be pinned as did that rare flat fly you came across .Not seen many of them this year :clapper:
Ps Hows the silver fish collection coming on and did you get that other place? .

#10 NID

NID

    Mega Hunter

  • Members
  • PipPipPipPip
  • 322 posts
  • Location:scotland

Posted 17 January 2009 - 06:57 PM

Thanks a lot Martin,good to see it in steps like that,atb NID.

#11 Guest_traceyg_*

Guest_traceyg_*
  • Guests

Posted 17 January 2009 - 07:44 PM

I found this post one of the best i have seen for ages martin.It was something i always wanted to do butcher a deer and i managed to do this a few weeks ago http://www.thehuntin...x...c=67149&hl=
but all i did was take the skin off. But after seeing that i NEED :blink: to do it . so cant wait for my chance . Well done mate i will be using this post to help me for sure :clapper: :clapper: :clapper:

#12 nimrod

nimrod

    Rookie Hunter

  • Members
  • PipPip
  • 33 posts
  • Location:co fermanagh

Posted 17 January 2009 - 09:08 PM

I found this post one of the best i have seen for ages martin.It was something i always wanted to do butcher a deer and i managed to do this a few weeks ago http://www.thehuntin...x...c=67149&hl=
but all i did was take the skin off. But after seeing that i NEED http://www.thehuntinglife.com/forums/pub... to do it . so cant wait for my chance . Well done mate i will be using this post to help me for sure http://www.thehuntinglife.com/forums/pub... http://www.thehuntinglife.com/forums/pub... http://www.thehuntinglife.com/forums/pub...


Martin ,

Just a to say excellent work ive "processed" a few deer now and having followed your pics etc i have found that ive employed a mix and match method, butthatks to your hard work i will be following your method ...stright forward, well explained and more importently it works.
Thanks again

Johnnie

#13 nimrod

nimrod

    Rookie Hunter

  • Members
  • PipPip
  • 33 posts
  • Location:co fermanagh

Posted 17 January 2009 - 09:09 PM

I found this post one of the best i have seen for ages martin.It was something i always wanted to do butcher a deer and i managed to do this a few weeks ago http://www.thehuntin...x...c=67149&hl=
but all i did was take the skin off. But after seeing that i NEED http://www.thehuntinglife.com/forums/pub... to do it . so cant wait for my chance . Well done mate i will be using this post to help me for sure http://www.thehuntinglife.com/forums/pub... http://www.thehuntinglife.com/forums/pub... http://www.thehuntinglife.com/forums/pub...


Martin ,

Just a to say excellent work ive "processed" a few deer now and having followed your pics etc i have found that ive employed a mix and match method, butthatks to your hard work i will be following your method ...stright forward, well explained and more importently it works.
Thanks again

Johnnie


#14 dogs-n-natives

dogs-n-natives

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 3,091 posts
  • Location:Forest moon of Endor

Posted 17 January 2009 - 09:57 PM

That will be very usefull for me Martin, ive never been too fussy about removing the bones from my roasting joints before, but im going to give it a go now! Plus it will save space in the freezer aswell.

Thankyou :) DnN

Should be pinned....

#15 martin

martin

    Extreme Hunter

  • Members
  • PipPipPipPipPipPipPipPip
  • 4,176 posts
  • Location:Somerset/Wiltshire Border

Posted 17 January 2009 - 11:04 PM

Christ mate fair play to you .If i attempted that it wouldnt look nowt like it mate .No patience for the finer detail me but i know a perfectionist when i see one .I will get you to do one for me ,been a long time since i actually ate the stuff rather than taking them over the dealer .Again fair play to you on the post which as said ,deserves to be pinned as did that rare flat fly you came across .Not seen many of them this year http://www.thehuntinglife.com/forums/pub...
Ps Hows the silver fish collection coming on and did you get that other place? .



I have yet to hear back from the bloke,but,thanks for reminding me mate,I will ring him Monday.
As for the 'Silverfish' mate,it has been a hectic culling season,and,here are a few pics of the quarry................
Here is a right and left I had recently,both headshot.........
Posted Image
And,here is a very good specimen head I took that was way off,I used the rangefinder and it was almost 8 inches away,I took that one because he was lame..........
Posted Image

Y.I.S. martin.


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users