air arms s200

[Guest gamebore]

bit of advice needed about the air arms s200. do you know when you shoot is the re-loading bolt meant to spring back about 1cm or is it a fault that needs fixing?

 

gamebore

[lawzy 0]

my s200 also blows the bolt back out, i find this annoying. my s200 also has another annoying problem. the wood surrounding the air cylinder is loose and has been since i bought it several years ago and is becoming increasingly worse over the years. is there a way of fixing this

[Big bald beautiful 1,231]

its held in by a screw and small spring im sure?

take it to a gun shop for a look, it happened on mine, but i just made sure the bolt was pushed forward and seated correctly

[stork 1]

my s200 also blows the bolt back out, i find this annoying. my s200 also has another annoying problem. the wood surrounding the air cylinder is loose and has been since i bought it several years ago and is becoming increasingly worse over the years. is there a way of fixing this

 

 

got the same probs with mine but still dead on accurate as always with aas200

[FLY 0]

fabric camo tape on my tube solved this looseness/ratling, gave a solid feel again.

[lawzy 0]

i think i will take it into my nearest gun shop n get them to have a look at it and i will also get some tape thanks guys

[Malt 379]

my s200 also blows the bolt back out, i find this annoying. my s200 also has another annoying problem. the wood surrounding the air cylinder is loose and has been since i bought it several years ago and is becoming increasingly worse over the years. is there a way of fixing this

 

Same problem with the one I've got here. (the foregrip area) Must be a common fault. No problem with the bolt though. (not yet anyway!)

[lawzy 0]

ive seen the limited edition s200 thats got a full stock and looks alot better than the s200 s200 basic

i might get one of them if i cant get hold of a better gun