Fox Nets

[Birdboy 2]

Hi all,

 

Just wondered what you guys use for your pegs on your fox nets? Got a few on the way just not sure what the best pegs are to use!!!

 

Cheers

 

BB

[hue jeers 6]

I use Blackthorne but whatever you like to use mate, I had some with metal tent pegs on but like the wood as it don't 'clink'

[hunt4life 0]

i use a section of a broom (wooden one) cut it the the size you want cut a point onto one end and away you go

[edzy 3]

Hi all,

 

Just wondered what you guys use for your pegs on your fox nets? Got a few on the way just not sure what the best pegs are to use!!!

 

Cheers

 

BB

 

I JUST DONE A BARN CONVERSION AND USED SOME OFF CUTS OF THE OAK FLOOR BOARDS CUT THEM TO SHAPE LITTLE RUB WITH SAND PAPER AND DRILL A HOLE CHEAP AS CHIPS AND STRONG

[Guest Name]

You will hear a lot of people saying "only use bla bla" but if you think about it all you need is something strong and shaped so its easy enough to sink, i have used all kinds of things from 2x1 to none rotten tree branches found at the earth, using shit does mean you have to change them or renew them more often but as long as they stick firmly to the ground and dont give easy they will do you for that job at least

[Birdboy 2]

Right oh, thanks guys..........will find something i'm sure!!

 

BB

[OldNog 432]

find an ash about 4 inches wide and cut it into logs however long you want you peg and then just chop it with a bill hook. Splits easy and is a good sturdy wood and should last a few seasons

[donnyc 1,203]

Yellow plastic tent pegs..Was dubious at first but not had one give yet .Cheap and light

[Aaron 3]

Spring tines off farm machinery cut too suit.