speedlamper 0 Posted February 25, 2008 Report Share Posted February 25, 2008 anyone know of a way to stop this, screws are tight but it still slides back after 10 shots or so, i have to start zeroning again, i know you can buy mounts which screw into the rail or somethng but i just bought these ones, cheers Quote Link to post
8shot 191 Posted February 25, 2008 Report Share Posted February 25, 2008 anyone know of a way to stop this, screws are tight but it still slides back after 10 shots or so, i have to start zeroning again, i know you can buy mounts which screw into the rail or somethng but i just bought these ones, cheers mate go out and get yourself a 1 piece scope mount that should solve it Quote Link to post
Coney 3 Posted February 25, 2008 Report Share Posted February 25, 2008 Speedlamper I had a HW80 that was prone to this simply because of the recoil this gun produced, tried numerous methods of trying to prevent "scope creep" but it did not matter how tight the mount screws were the scope was prone to movement. Hence I sought advice off a expert who advised me to fit a arrester block behind the rear scope mount which simply fitted to the scope rail. If you log onto www.sportsmatch.co.uk this site has what you need. Hope this helps Coney. Quote Link to post
speedlamper 0 Posted February 25, 2008 Author Report Share Posted February 25, 2008 cheers lads, found an arrester block on targetsports, cheaper than buying new mounts Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.