ferreter216 0 Posted January 15, 2008 Report Share Posted January 15, 2008 hello everyone im jack im seventeen just joined site love it can anyone tell me how to properly use the mk3 set because instructions that come with it are crap Quote Link to post
reddog70 236 Posted January 15, 2008 Report Share Posted January 15, 2008 hello everyone im jack im seventeen just joined site love it can anyone tell me how to properly use the mk3 set because instructions that come with it are crap welcome i am new here myself the new finders do take some getting used to. practice with the collar off the ferret and get used to the different sound pitches tuning in etc Quote Link to post
ferreter216 0 Posted January 15, 2008 Author Report Share Posted January 15, 2008 cheers mate Quote Link to post
chink07 0 Posted January 15, 2008 Report Share Posted January 15, 2008 thats sound advice reddog70 when you get used to the pitch yull never look back just remember to put the collar on tight to make sure the ferret dos,nt slip it (iv got the t shirt to prove it )yours in sport chink Quote Link to post
Hob&Jill 258 Posted January 15, 2008 Report Share Posted January 15, 2008 The way I learnt is getting someone to hide it, and then finding it, give it a try. The method I use is to scan around on SEARCH, until you get to below 8 foot on the LED's , then swich it to LOCATE, scan around further, following the sound on the locator (high pitch getting closer) then once you are confident you are fairly near, start to turn the PIN POINTER slowly until you hear nothing, wave the locator over the ground, if you still hear nothing then move the PIN POINTER back until you hear the sound and then you should be more or less on top of the ferret. It takes some getting used to, and there will be times when it will appear to be singing at you for sake of it Its quite hard to tell in writing, as it appears some people have different methods, just keep practising! EDIT/PS, Remember that when you are on SEARCH mode that you read the LED's depth from the top and when on LOCATE read from the bottom H&J Thats the method I use, keep practising too. Quote Link to post
andy s410c 63 Posted January 15, 2008 Report Share Posted January 15, 2008 hello everyone im jack im seventeen just joined site love it can anyone tell me how to properly use the mk3 set because instructions that come with it are crap Welcome Jack,if you go to page 18 on here you,ll find the laymans guide by Stubby on how to use the MK3 its under the title MK3 Finders by Outhawking it should help you.... it did for me Quote Link to post
ferretville 69 Posted January 15, 2008 Report Share Posted January 15, 2008 Easy to use mate type in mk111on search and loads of stuff will come up just go through them and some where it will tell u how to use them FV Quote Link to post
ferreter216 0 Posted January 15, 2008 Author Report Share Posted January 15, 2008 thanks really helpful Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.