Recent Sessions.

[mattwhite 1,993]

Thanks for the advice lads??

[Underdog 2,337]

Don't let anyone say a cheap airgun can't deliver ?

 

 

U.

[secretagentmole 1,701]

Hi moley.

 

I usually make meatloaf with woodies and squirrel usually goes to ferreters.

Sometimes I will cook one.

 

The hatsan 900 simply has a blanking screw where other models with the same trigger have a longer screw to offer all be it limited adjustment.

The adjuster simply adjust sear engagement so caution is needed so it does not become unstable. That will only happen if one tries to make it a match grade trigger via this screw alone!

Replace the screw with one around 6mm long, IIRC it is m3 standard pitch.

 

Stoning the Sears or smoothing the surfaces make a difference too and is easy to do.

The long reach is a pain but manageable.

It can be improved by drilling across the pressed steel trigger high up in the unit and cut from the back of the blade to the drilled hole and then bend the blade backwards closing the cut you just made.

Recut the slot and bend again. Makes for better reach.

 

U.

Thanks! I know they can deliver.

 

Hey have you seen the Phox package from Gamo? A Birmingham made PCP (Ultra with Gamo trigger), pump, scope, pellets, targets and gun bag can be yours for under £490! Thought that may appeal!

Edited January 31, 2017 by secretagentmole

[Underdog 2,337]

 

 

Hi moley.

 

I usually make meatloaf with woodies and squirrel usually goes to ferreters.

Sometimes I will cook one.

 

The hatsan 900 simply has a blanking screw where other models with the same trigger have a longer screw to offer all be it limited adjustment.

The adjuster simply adjust sear engagement so caution is needed so it does not become unstable. That will only happen if one tries to make it a match grade trigger via this screw alone!

Replace the screw with one around 6mm long, IIRC it is m3 standard pitch.

 

Stoning the Sears or smoothing the surfaces make a difference too and is easy to do.

The long reach is a pain but manageable.

It can be improved by drilling across the pressed steel trigger high up in the unit and cut from the back of the blade to the drilled hole and then bend the blade backwards closing the cut you just made.

Recut the slot and bend again. Makes for better reach.

 

U.

Thanks! I know they can deliver.

 

Hey have you seen the Phox package from Gamo? A Birmingham made PCP (Ultra with Gamo trigger), pump, scope, pellets, targets and gun bag can be yours for under £490! Thought that may appeal!

Lol,they look good but no mate, I have a dolly. She is Chinese .

 

U.

[Underdog 2,337]

Think I paid £168 for it new.

50 shots from its tiny tube. Not pellet fussy and the tiny mod do work too.

 

U.

[mattwhite 1,993]

Great photos U.

Both those rifles combined with your knack for scopeless hunting seem to do the job very well??