Rez 4,961 Posted October 17, 2015 Report Share Posted October 17, 2015 Got the tx in bits tonight, as I put a few pellets through it lastnight and it just wasn't shooting nice at all, grouping was terrible, stripped it tonight, the Grease was like oil, running off ! The spring is out of square on the ends, so it's going to get a good clean, re lube, and a polish to the trigger sears, I'm in two minds to vmach it .I hear, and this means I dont know for sure, that the v-mach kits may not keep the rifle below the limit, with regard AA springers only. When I got my PS, I thought about doing it but everyone I spoke to said dont. Mac included... Its running on synths anyway. Think Im leaning the HC way... in a few months like. Nice choice there viz. Think it will be getting a new spring as the 1 that's in it is 8mm out of square, which in a way is good as that explains the pi55 poor grouping lastnight, then a good polish ! Rez did you use the vMach piston seal Mac sent you ? Do bears shit in woods? 1 Quote Link to post
bigmac 97kt 13,837 Posted October 18, 2015 Author Report Share Posted October 18, 2015 Dont v.mach it Sean just put the v,mach piston seal in her and polish the tits out of her bud you no what the 97 was like with a full v,mach kit in her ,it took some getting down to under 12 mate . You say,d last night you thought the spring was turning and hitting a flat spot and thats just off pulling the trigger once again looks like your right . when you have time mate dont forget you have loguns pro sport to tune and polish atvbmac :thumbs: Quote Link to post
vizlauk 1,568 Posted October 18, 2015 Report Share Posted October 18, 2015 New spring ordered for it ! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.