lllluke1 329 Posted January 30, 2015 Report Share Posted January 30, 2015 I'm changing my Gamo rocket IGT from a gas ram to a spring. My question is, how much pre load if any is there usually on a gas ram? Don't have a spring compressor and don't want to risk the internals flying out if I don't use one. Cheers Luke Quote Link to post
barrywhite 282 Posted January 31, 2015 Report Share Posted January 31, 2015 I would think they are like most gamos .The trigger and spring are the same in a lot of them .there is stuff on you tube ect for other gamos .I would think your big problem ,if it is possible to just fit a spring into the gun ,which most probably you can .Is you will have to fit a spring guide .I think a webley hawk has no spring guide but that is not usual . Quote Link to post
JBWALES 5 Posted February 22, 2015 Report Share Posted February 22, 2015 I believe the gas ram in the Gamo range of guns along with a few other makes are sealed units, unlike the gas rams in the Theoben range which are user serviceable enabling you to carry out a spring conversion quite easily using the parts already in the gun. It may be the case that you will have to source a piston from a similar Gamo spring powered gun. John Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.