jeppi26 1,855 Posted July 27, 2014 Report Share Posted July 27, 2014 As anyone done or had the trigger mod done with the copper crinkle washers? If so what is the difference and can you feel the difference? Just been looking at making the trigger abit crisper than standard and found the crinkle copper washer trigger mod. Quote Link to post
jamesS410 106 Posted July 27, 2014 Report Share Posted July 27, 2014 (edited) How old is your rifle? The latest versions have moulded bushings cast in to the side plates leaving no room to fit crinkle washers. If this is the case its still very much worth stripping the trigger mechanism down and polishing the sears. Its a very worthwhile modification and fairly quick and simple to do and will transform your rifle. As an after thought it would be worth having a look in the technical reference section on the AAOC site Edited July 27, 2014 by jamesS410 Quote Link to post
radioham 0 Posted August 2, 2014 Report Share Posted August 2, 2014 Here you go worth the effort i should imagine,will be doing mine this weekend if weather doesn't pick up otherwise of shooting . http://www.shootforum.com/forum/s4x0trigger.html Quote Link to post
davyt63 1,845 Posted August 3, 2014 Report Share Posted August 3, 2014 hi Rex i have done a few,and my own .it dose make a difference,nice and smooth! you will have to polish the contact points on the sears as well though to a mirror finish,a little dry slide and you get a really slik release,nice and smooth! Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.