Lightforce 170 Filters

[lady hunter 162]

has anyone made a decent filter for these,ie flip up or a slide.wanting something better than ripping the noisy front off

[andy97 209]

would be pretty easy to make tbh mate using the same idea as the clulite band of plastic you can actually buy the ball and fitting from clulite about 6quid and just take the catches off the lightforce filter n jobs a good en

[derek2012 32]

has anyone made a decent filter for these,ie flip up or a slide.wanting something better than ripping the noisy front off

I know what you mean mate blood noise

[andy97 209]

only bad thing with the flip up filters is you sometimes have to mess about with them to stop the light getting out the sides

[staffpeg 217]

would be pretty easy to make tbh mate using the same idea as the clulite band of plastic you can actually buy the ball and fitting from clulite about 6quid and just take the catches off the lightforce filter n jobs a good en

. There's already been a thread on this & there's pics ov some one doing just this ?

[staffpeg 217]

would be pretty easy to make tbh mate using the same idea as the clulite band of plastic you can actually buy the ball and fitting from clulite about 6quid and just take the catches off the lightforce filter n jobs a good en

. There's already been a thread on this & there's pics ov some one doing just this ?

[dustyj 63]

Yeah.ive used a homemade swivel filter since they first came out without any issues...i used a 6inch stop end drainage adaptor which fits inside of the rim of the lamp,cut out the whole middle and cut about 5 mill off the outside of the adaptor ti give it a tight fit.you can either spray the adotor black or just use black tape which I do to keep the beam right.once this is done the filter needs two of the prongs cutting of and the remaining prong needs heating up and bending over to which you can use as an up and down swivel.then you screw the filter onto the rim of the adaptor and thats it.

Mite sound a bit of fxck on but it works fine for me.

[Tiny 7 1,694]

Any pictures dusty.....?

 

 

I know millet done one with a tom tom hinge and still working well

[dustyj 63]

I cannot get pictures up tiny.pm your number and ill send by phone if you want mate

[staffpeg 217]

Yeah.ive used a homemade swivel filter since they first came out without any issues...i used a 6inch stop end drainage adaptor which fits inside of the rim of the lamp,cut out the whole middle and cut about 5 mill off the outside of the adaptor ti give it a tight fit.you can either spray the adotor black or just use black tape which I do to keep the beam right.once this is done the filter needs two of the prongs cutting of and the remaining prong needs heating up and bending over to which you can use as an up and down swivel.then you screw the filter onto the rim of the adaptor and thats it.

Mite sound a bit of fxck on but it works fine for me.

 

sounds good any pics mate ???

[dustyj 63]

Il try and sort some puctures

[paulus 26]

Any pictures dusty.....?

 

 

I know millet done one with a tom tom hinge and still working well

he did i just drill a hole in one of the lugs and attach it to the handle with a piece of cord

[Tiny 7 1,694]

Paulus lol thats what mine is a shoe lace throw the ear of the filter tied to the lamp......

[andy97 209]

 

Any pictures dusty.....?

 

 

I know millet done one with a tom tom hinge and still working well

he did i just drill a hole in one of the lugs and attach it to the handle with a piece of cord

 

how do you mean paul ?any pics mate as your way seems alot less fcuking about

[staffpeg 217]

I just cut 1 ear of the filter nearly off & heat the other 2 up & bend them outover so they act as a little handle to get the filter off