Cz 452 Trigger Kit

[Froudy 40]

Hi lads,

 

Ordered a rimfire magic trigger kit and it came this morning any advice before I start taking it apart?

 

Cheers

 

Froudy

[paulus 26]

Hi lads,

 

Ordered a rimfire magic trigger kit and it came this morning any advice before I start taking it apart?

 

Cheers

 

Froudy

read the instructions

[Froudy 40]

I have!!! Still confused tho hahaha

[paulus 26]

I have!!! Still confused tho hahaha

dead easy mate, take the stock off, knock out the pin, choose a spring and tube ( i used second lightest) replace the pin, put the stock back on. cycle the bolt, give the but a tap with a rubber mallet to ensure it does not fire (to sensitive) and bobs your uncle

[Deker 3,478]

There are lots of videos on the web....

 

http://www.bing.com/videos/search?q=fitting+trigger+kit+on+cz452&view=detail&mid=4C578118CCF3912F52244C578118CCF3912F5224&first=0&FORM=NVPFVR&qpvt=fitting+trigger+kit+on+cz452

[Froudy 40]

Cheers lads

[PLEDGEY 496]

If you haven't got a pin punch you can use a small drill bit. Place the shaft end of the bit on the pin and tap it with a hammer. Be careful it doesn't break and fly up in yer eye.

[paulus 26]

If you haven't got a pin punch you can use a small drill bit. Place the shaft end of the bit on the pin and tap it with a hammer. Be careful it doesn't break and fly up in yer eye.

if you compress it, it just drops out with a small tap

[hutchey 147]

Dead easy mate

[Froudy 40]

All done now thanks lads

[Addz131 7]

Had a rimfire magic on my 452 when i brought it love it .

[seprim 32]

youtube

 

Andrew