Skot Ruthless Teale 1,701 Posted June 4, 2013 Report Share Posted June 4, 2013 hey guys my hw97kt's but pad has started coming loose, not the metal to metal bit, but where the metal meets the wood of the stock, at the bottom. I know it will be a simple tightening of a screw, but has anybody else had this happen? between both my hw97k actions whilst they have been fitted in this stock I must have shot about 5000 pellets. I don't think they recoil that bad so is 5000 shots about right for the buttpad to start coming loose.? cheers SKoT Quote Link to post
bigmac 97kt 13,842 Posted June 4, 2013 Report Share Posted June 4, 2013 Hi skot just put some super glue in the holes then screw the screws back in and let it set or just carry a screw driver around with you and that will make it better :thumbs: :thumbs: atvbmac Quote Link to post
Skot Ruthless Teale 1,701 Posted June 4, 2013 Author Report Share Posted June 4, 2013 Its all sorted now mac, needed a 3mm hex key to tighten the plate to the stock and my scrwewdriver to loosen the adjustable pad. rear trigger guard screw had loosened slightly aswell after about 600 shots since re-assembly. thinking about it now actually me whacking the butt to see if my trigger was too light to be safe probably loosened the butt plate Quote Link to post
risingfriend 1,042 Posted June 4, 2013 Report Share Posted June 4, 2013 You need to stop caressing and licking it mate i have had to stop sharing a bed with mine the wife gettin the right forest LOL 1 Quote Link to post
Skot Ruthless Teale 1,701 Posted June 4, 2013 Author Report Share Posted June 4, 2013 (edited) just gave her a good rub down with the guncloth shes all shiny again now love my sexy little hw97KaTie not going to take her in the bath with me tho .. ~ im cheating on her with Stella (artois) :laugh: Edited June 4, 2013 by Skot Ruthless Teale 2 Quote Link to post
risingfriend 1,042 Posted June 4, 2013 Report Share Posted June 4, 2013 stock looks quality mate what you oiling with? Quote Link to post
Skot Ruthless Teale 1,701 Posted June 4, 2013 Author Report Share Posted June 4, 2013 nowt that's just the factory finish! I just rub it down with a silicone gun and reel cloth after ive been out with it, or if it gathers too much dust after a week or so of no use just sitting in the corner Quote Link to post
risingfriend 1,042 Posted June 4, 2013 Report Share Posted June 4, 2013 nowt that's just the factory finish! I just rub it down with a silicone gun and reel cloth after ive been out with it, or if it gathers too much dust after a week or so of no use just sitting in the corner looks a good un mate very nice 1 Quote Link to post
Skot Ruthless Teale 1,701 Posted June 4, 2013 Author Report Share Posted June 4, 2013 bit of plinking today to get the vmach bedded in. 28 yards - last light, right to left slight breeze-.. daystate Li 6 shots total top right was marker shot/POA 34 yards slight breeze right to left, right hand shot was POA 6 shots total jsb exact 4.52 im no Si Pittaway but I do alright lol. massive respect to his shooting ability, and a lot of guys on here that are far better than me SKoT 1 Quote Link to post
bigmac 97kt 13,842 Posted June 4, 2013 Report Share Posted June 4, 2013 Better mate all better now :toast: :toast: 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.