Air Rifle Scope

[Tom Crichton 21]

Hi,the other day i acidentaly knocked my gun over onto the floor and i didnt think anything of it till yesterday when i came to use it and the zero was well out.I started to zero it in till the windage turret would move any more to the right and the gun is firing at least half a foot to the left.What could have gone wrong?Can i fix it?

Any answers will be grate Thanks Tom C

 

 

 

 

 

 

 

 

 

 

 

 

 

[dogsbollocks58 36]

hi mate take the scope off the gun and reset the scope and zero it back in , see if that will work let us know how you get on,, but take the scope off the gun altogerther

[walshie 2,804]

As above, but I'd take the mounts off too and start again from scratch.

 

Don't forget to centre your windage and elevations.

[j j m 6,609]

as above start all over again mate

[hunter100t 56]

While the scope is off roll the scope on parallel bars made up of two 1 by 2 inch bits of wood either side of the turrets, just to see if one end is out.

 

atb phil

[andyfr1968 772]

What rifle is it? Sounds like the barrel may have taken a knock.

[Tom Crichton 21]

What rifle is it? Sounds like the barrel may have taken a knock.

Smk synxs,thanks for all the replys lads