walshie 2,804 Posted April 22, 2013 Report Share Posted April 22, 2013 I just took my 10/22 apart and fitted an extended mag release and an auto bolt release. Seemed to go smoothly enough. i.e no bits left over. My question is regarding the 2 pins you need to push out to take the trigger assembly off and the one big pin at the back that stops the bolt coming too far back. These are really loose. The ones holding the trigger group just needed the tiniest touch to get them out and the big one at the back fell out when I didn't want it to. Is the only answer to this to get new pins? Cheers. Quote Link to post
halamrose 24 Posted April 22, 2013 Report Share Posted April 22, 2013 dab of nail varnish Quote Link to post
charlie caller 3,654 Posted April 23, 2013 Report Share Posted April 23, 2013 Have you tried turning them round,putting them in the other way?or a bit of locktite semi permanent. Quote Link to post
walshie 2,804 Posted April 23, 2013 Author Report Share Posted April 23, 2013 Have you tried turning them round,putting them in the other way?or a bit of locktite semi permanent. Yes, tried that. Well loose still. Will try the locktite. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.