Jump to content

Bsa R10 Mag


Recommended Posts


Old rings perhaps and the rubber is perished.

Not lubed correctly and they are dry.

The wrong size rings and they have been over stretched.

Not the correct shure. Too hard too soft.

A slight burr inside the mag causing it to rub when it cycles.

 

A few suggestions to start you on your way

  • Like 1
Link to post

Cheers moxy, they are brand new o rings from bsa, it could be a burr inside the mag like you say i will look in a min,I have replaced them twice now in the last month lol, what's the best stuff to lube them with mate?

 

Atb

Link to post

It sounds like the magazine alignment is out,do the pellets look fairly central to the hole when you load the mag? If the mag locking pin is not always in place it will have an affect on the O rings. I always lubricate with a bit of fanny batter. :thumbs:

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...