smecky 52 Posted December 9, 2012 Report Share Posted December 9, 2012 Any ideas how to fix its a 22 Quote Link to post
Tron 173 Posted December 9, 2012 Report Share Posted December 9, 2012 If its leaking through the barrel when the rifle has been charged then you have foreign matter on the firing valve seat. If you havent cocked it and you are trying to fill it from empty then air will escape through the barrel. if there is air in the resevoir and its still leaking then there is dirt on the valve seat Quote Link to post
smecky 52 Posted December 9, 2012 Author Report Share Posted December 9, 2012 Yes it's leaking when the cylinder is attached. Both when cocked and not cocked. Is this a quick fix? Quote Link to post
Marksman 934 Posted December 9, 2012 Report Share Posted December 9, 2012 the 12x1.2mm O-ring on the valve block is goosed mate.... This one.... replace it with a 12x1mm Darryl Quote Link to post
smecky 52 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Is that a 12.1 or 12.1.2mm and where can I them. Thanks Quote Link to post
Marksman 934 Posted December 10, 2012 Report Share Posted December 10, 2012 12x1.2 is the original size HW put in as a crush fit 12x1 is the recommended replacement size as an "upgrade" Have a look for your nearest bearing/seal suppliers mate Darryl Quote Link to post
smecky 52 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Do I need to put any sealing stuff on the seal and also what do I clean it up with. Cheers Quote Link to post
smecky 52 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Is that a 12.1 or 12.1.2mm and where can I them. Thanks Quote Link to post
smecky 52 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Also do I need to change the part 2655d. Cheers Quote Link to post
Marksman 934 Posted December 10, 2012 Report Share Posted December 10, 2012 Replace the 12x1.2 with a 12x1 Wipe clean with a rag Quote Link to post
smecky 52 Posted December 10, 2012 Author Report Share Posted December 10, 2012 Hi The white plastic thing has a brass thing on it which way does this go back on. With the flat bit towards the plastic???? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.