Jump to content

New lightforce 170 dimmers


Recommended Posts

Could some one shine a light on the new dimmers, read that there slow and the phrase was " whatever your hunting is 3 fields away before reaching full brightness" lookin to get one but not if the dimmers slow. Also read that i could buy a magnetic pigeon speed controll n fasten it to my 170 n wire it in that will work????

Link to post

Had one, sent it straight back, absolute shite!!! Why they changed from the 'dial dimmer' I do no know? Them button dimmer things are the worst.. Stick with an old lightforce striker variable or get a deben tracer variable

Link to post

Deben used to make the old style lightforce variable with a dial on the back for the lightforce range of lamps. When they stoped lightforce brought out the new type dimmer with two switchs and deben continue to make the dial type which is fitted to there tracer range of lamps.

Link to post

The dimmer is fairly slow if going from really dim to full brightness using the dimmer button (maybe a second?), on the other hand, if you pull the trigger again, it'll instantly go to full power beam.

 

The only thing that takes some getting used to is turning it off... You've got to remember to pull then hold the trigger in for a split second to turn it off, if you just pull the trigger and let go, it'll go to full beam, not good when your trying to be sneaky!

 

Also the switches are silent action now, and when I opened it up the wiring didn't look half bad...

Still put a cable tie tight inside the red bit from the handle to ensure the circuit board doesn't get pulled about, just in case.

Also they still come with that bloody cigarette lighter plug on it, so I swapped that too.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...