axsor repair

[barker100% 0]

hi everyone. ive got a webley axsor which is in need of a repair/ service. pellets just plop out of the end of the barrel and also the barrels loose due to screwing sound moderater off and on over the years damaging the screw at the end. can anyone recommend somewhere in the hull area that will do a good job. took it to one of the local gun shops who did a very poor repair and i wont be returning to them. regards

[Phantom 631]

When you say the pellets just "plop out the end" do you mean they are falling through the barrel or is it that the gun is very underpowered?

 

Tony

[barker100% 0]

sorry, yes the guns very under powered

[secretagentmole 1,701]

Er have you filled it with air? Best to ask....

[AR177 588]

Sounds like you have the same problem my farther did with the webley raider -

 

your barrel is not correctly aligned, the way it was described to me was trying to blow with half your mouth shut, needs twisting back into correct alignment so the ports are all fully open, this will increase the power and solve the problem probably worth while getting it serviced too

 

Any decent gunsmith should be able to sort it out

 

ATB

 

Adam

[tomburras 2,721]

^{Arron wheelers is not far from you (Brighouse) he is great for airgun work and cheap too. He has done a few services on my and my friends air rifles and they where spot on, couldent reccomend him enough.}

[barker100% 0]

thanks, brighouse isnt a real long way but i was kind of hoping there would be somewhere in hull who could do it properly

[barker100% 0]

i forgot to add, yes it filled to 190 bar