HW100 Help

[IanB 0]

Anyone any good with HW100's around the north east..I bought a seal kit to stop a very slow leak, when the cylinder is left screwed in, haven't used the thing yet .... I did replace some seals before on it. but it never stopped it leaking really, so bought a full set, hopefully it will sort it this time....

 

Anyway if anyone good with them send me a PM

[villaman 9,982]

Hi

Marksman on here

[Webby1 34]

Hi

Marksman on here

yep darryls your man

[Probuk 93]

I had a simaler problem myself Ian..it tured out id nipped the seal behind the cylinder..apparently they can leak if you store them with only a little charge in them aswell..Im no expert though..Darryl's your man for this and he's your way.

[IanB 0]

Got advised off Daryll to leak test in the bath... Which I did, found a small leak from this area.

 

Anyone suggest what seals it could be?

[paulus 26]

this might help or then again it might not http://www.airgunfor...highlight=hw100

or this http://media.photobucket.com/image/hw100%20exploded%20diagram/alhucoll/HW100.jpg?o=1

[IanB 0]

These things are a nightmare Just took the breech apart replaced the seal, now the twatting things pissing air out the barrel, had to replace the exhaust valve seal with the original seal to stop it, now the things leaking from the same place I had the problem with again, even after replacing with a new breech seal.. I think I may wrap the thing around a wall..

[paulus 26]

These things are a nightmare Just took the breech apart replaced the seal, now the twatting things pissing air out the barrel, had to replace the exhaust valve seal with the original seal to stop it, now the things leaking from the same place I had the problem with again, even after replacing with a new breech seal.. I think I may wrap the thing around a wall..

get a rapid, easy to strip and repair even in the field with just a multi tool, there the land rover of the airgun world

[Budaholic 0]

These things are a nightmare Just took the breech apart replaced the seal, now the twatting things pissing air out the barrel, had to replace the exhaust valve seal with the original seal to stop it, now the things leaking from the same place I had the problem with again, even after replacing with a new breech seal.. I think I may wrap the thing around a wall..

 

I'll take it off your hands if your thinking of throwing it in a skip. I can offer you an old Ker-Plunk game, 10x 8ft lengths of 2"x2" and a bag of Tangfastic with all the cherrys missing? Oh and will you deliver to the South-East? What do you say?