Tyla 3,179 Posted March 17, 2012 Report Share Posted March 17, 2012 I'd like to scope mount the above but cant find a mount to do so, is there one available? If not has anyone got any ideas? Quote Link to post
gravel 63 Posted March 17, 2012 Report Share Posted March 17, 2012 Lenser do there own plastic scope mount. Quote Link to post
tegater 789 Posted March 17, 2012 Report Share Posted March 17, 2012 Not near a computer at minute, so I don't know if this will fit the p14, but I have the p7, with a velcro mount, that cost about 6 quid and does the job. When I get in I will see what diameter the p14 is, and see if it fits. Quote Link to post
Tyla 3,179 Posted March 18, 2012 Author Report Share Posted March 18, 2012 Cheers lads, I have seen the lenser mounts but in the list of models it fits it doesnt mention the P14, they all seem to be for the P7 or equivalent. The only mounts I've seen specifically for the P14 are in New Zealand? Either that of I'm just not looking in the right places Any chance of a link? Quote Link to post
tegater 789 Posted March 18, 2012 Report Share Posted March 18, 2012 I will take a photo of mine and stick some measurements on, and then you can work out if it will fit. Quote Link to post
gravel 63 Posted March 18, 2012 Report Share Posted March 18, 2012 i cant see why the lenser scope mount wont fit that to torch its fully adjustable. Quote Link to post
Tyla 3,179 Posted March 18, 2012 Author Report Share Posted March 18, 2012 i cant see why the lenser scope mount wont fit that to torch its fully adjustable. I dont know, it just listed the model it'll fit and didnt mention the P14. I just assumed it wouldnt. Its quite alot bigger than the P7, I will measure the diameter later and post it, if it seems to you like it'll fit i'll buy one. It does seem strange that they dont do one when they do for all the others Quote Link to post
Tyla 3,179 Posted March 20, 2012 Author Report Share Posted March 20, 2012 The diameter of the torch body is 33mm, will the P7 mount fit it? Quote Link to post
tegater 789 Posted March 20, 2012 Report Share Posted March 20, 2012 Thats about 4mm wider than the P7. The rubber mount will stretch to fit it, but I am not sure if the velcro will be long enough or will need replacing. I will have a look around and try and find something a similar diameter. Quote Link to post
tegater 789 Posted March 20, 2012 Report Share Posted March 20, 2012 The only thing I could find around the house exaxctly 33mm was one of the wifes potions!! It seems to fit ok but only leaves about 20mm of overlapping velcro, which seems to hold it tight. It wouldnt be hard to extend that by adding a further strip of velcro, or replacing the one already on, if you were not happy. The width of the top part of the mount is 27mm but is very flexible, being rubber. Hope this helps. Quote Link to post
lksopener 105 Posted March 20, 2012 Report Share Posted March 20, 2012 If you want one or those I have a spare at £5 posted. Liam Quote Link to post
Tyla 3,179 Posted March 20, 2012 Author Report Share Posted March 20, 2012 Tegater - thank you very much for that, very helpful and much appreiciated Iksopener - I'll get back to you, I ordered one off ebay but not a proper lenser one. I'll see if it fits first. Cheers Quote Link to post
lksopener 105 Posted March 20, 2012 Report Share Posted March 20, 2012 One off eBay wil be fine that's where mine came from! Quote Link to post
gravel 63 Posted March 20, 2012 Report Share Posted March 20, 2012 The bracket will fit. been there done that, the bracket looks cheep and plastic but it does its job well, buy shit buy twice so they all tell , me , lol. lenser dont make shite, trust me. nice torch and velcro , just dont match. lol. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.