bunnyboiler 1,054 Posted January 31, 2012 Report Share Posted January 31, 2012 The wiring in the handle is playing up and it seems its a sealed unit any ideas how to sort the wiring out its the dimmer model cheers Quote Link to post
123456 146 Posted January 31, 2012 Report Share Posted January 31, 2012 Let the wiring out the handle, starting at the plug work your way through all connections whilest lamp is on. Best to plug it into the car so that it removes the battery as a fault. If its not any wire you can get to there will be nothing you can do Quote Link to post
the big chief 3,099 Posted January 31, 2012 Report Share Posted January 31, 2012 every one of mine go ther check fore brakes every wher all so take out the switch then all the wire will hang out so you can check it all if there is a brake cut the wire and put a block conector in Quote Link to post
bunnyboiler 1,054 Posted January 31, 2012 Author Report Share Posted January 31, 2012 (edited) ive done that mate when the lamp is on if i wiggle the wires it goes on and off its deffo in the top of the handle but how do i get to inside is it something to do with the pop rivet where the bulb goes in to get to the connectors ? Edited January 31, 2012 by bunnyboiler Quote Link to post
daz280597 4 Posted January 31, 2012 Report Share Posted January 31, 2012 Yeah drill rivets out of head and if u ever disconnect switch I'll wires through handle where clips on red cap hold gives u more room to lay with Quote Link to post
the big chief 3,099 Posted January 31, 2012 Report Share Posted January 31, 2012 mine do it there will be a brake in the wire pal for it to do that the switch holds the wire tite so it will not pull out near the bulb look on the coil wire as well near where it goes in to the handle Quote Link to post
Irish Lurcher 1,013 Posted January 31, 2012 Report Share Posted January 31, 2012 Re wire the lamp and you wont have any further problems. The lightforce are a cnut for the wireing breaking on the inside of the cable, very hard to locate the break, just rewire and problem solved. Quote Link to post
jeppi26 1,855 Posted January 31, 2012 Report Share Posted January 31, 2012 Take off the pan(lamp head) and drill the rivets out and rewire from there ;-) Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.