mike1458 14 Posted September 2, 2011 Report Share Posted September 2, 2011 I am finally starting to prepare an area to put a ferret court down on. I am using flag stones for the base and a wooden frame. I'm happy with all that. the one question I do have is how do people secure there court to the ground. I have been looking at them U shape bolts. Anyone use these or any other alternative? Call me paranoid, but I get worried about people coming into my garden as I have a garden open to access. All help appreciated. Mike Quote Link to post
Malt 379 Posted September 2, 2011 Report Share Posted September 2, 2011 How thick are your slabs? I'd be tempted to screw it down using rawlplugs and stainless steel screws.. Have you considered using concrete? It'll probably cost you less & some paving slabs have a tendency to be porous. Quote Link to post
joe14 98 Posted September 2, 2011 Report Share Posted September 2, 2011 Mines not secured but it cant be budged from the floor. Im no expert but you could use some L shape brackets to screw it to the floor (on the inside). Or you could use those fence post brackets, like a sqaure box that tightens up and you bolt it to the ground. Hmm dont know how you would do it though. Quote Link to post
mike1458 14 Posted September 2, 2011 Author Report Share Posted September 2, 2011 Pretty thick malt mate. I think I will try and do that and screw them into the slabs with stainless steel screws. Should work. Didn't really think of just screwing it in. Mike Quote Link to post
Malt 379 Posted September 2, 2011 Report Share Posted September 2, 2011 Just take your time drilling through the slabs. Use a new masonry bit and turn the hammer off it's a SDS type drill with an impact hammer function. If you've just got the bog standard Black and Decker type drill, the hammer shouldn't be a problem. Quote Link to post
pikeypaul 11 Posted September 2, 2011 Report Share Posted September 2, 2011 Use direct fix screws no need for messing with plugs, you need a 6 mm drill bit for hole and the screws tap into hole. How thick is the wood your using for base. Quote Link to post
coneykenny 98 Posted September 2, 2011 Report Share Posted September 2, 2011 get down your local hardware and ask for anchor pins,4in or 6inch.they look like a hollowed out nail. you drill thru the timber down into the slab or concrete and hammer the pins home. my own dog pens are secured this way and i can can guarantee the wont stir. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.