How to service a daystate harrier x2

[big scott 6]

Just got myself a FAC Daystate Harrier x2, its knocking on a bit so asked my local dealer for a price for a full service, he comes back with £350 so needless to say i told him to stick that price up his bum. Told me that only Daystate can do the work as specialist tools are needed, IS THIS RIGHT or can i tackel it myself

Or if any one Knows someone in the North East who is a dab hand

[mikeyblue 28]

£350, dont know where he pulled that figure from!!

 

I used to have a Daystate MK3 (sub 12ft/lbs ) and that was pretty simple to service myself. The X2 is a similar action. I just brought a few seals off Ebay for pennies and did the work myself. I replaced the seals gave it all a good de-gunging, and polished the hammer.

 

This link may help but its for the MK3, but dont think there will be many differences.

http://www.freewebs.com/stripdowns/mk3sstrip.htm

 

Hope this helps a little.

 

Mikey.

[big scott 6]

Big help that Mikey mate thanks

Big Scott

[davyt63 1,845]

Hi mickeyblue

a nice strip down of the TX200 i shall be doing that soon!

thanks buddy

 

regards

 

Davy

[mikeyblue 28]

No probs lads! Glad I could help.

 

Mikey.

[Marksman 934]

give Adi at A & M Custom Gunsmiths a shout mate, tell him Darryl told you to phone and you're off THL, he deals with Daystates and as a lot of the guys on here will tell you he's very good at what he does and for a very fair price

 

I wont deal with anyone else now!

 

Contact details

 

telephone/fax: 01623 861308

 

mobile: 07749 993 196

 

email: amcustomgunsmiths@hotmail.co.uk

 

Darryl