Jump to content

New Toy


RAMCAM

Recommended Posts

Hi Lads

 

Got myself a skan chronograph today it was a bit on the expensive side, but worth it in the long run. I need to change the seals on my hw100 and adjust the regulator output to gain more shots per fill, then adjust both my 100 and 97 to 11.8ftp. It will be great being able to use the chrono indoors.

 

Thanks for the info on the chrono lads I spoke to Ian in sporting supplies today and he also highly recommended them. :thumbs:

post-21616-0-71086700-1295047225_thumb.jpg

Link to post

Wanna come chrono my TX i got from shop 2 weeks ago it was at 11.7 but the ammount of practise i been doing i feel its dropped

 

 

 

 

 

 

gratz on new bit of kit though RAM

 

I would gladly test it if you were a bit more local. :yes:

I'd be careful if your tx is from new the power will creep up around 0.5 when the spring beds in.

 

Thanks Mate :thumbs:

Link to post

Hi Stevo,

 

Dont panic too much buddy as Tony Wall (a creditable spring rifle tuner) told me that as you use a new springer and it beds in it can up it's power very slightly instead of drop its power.

 

I belive that this is due to the action running smoother with less friction on the internals but im no gunsmith, you would have to ask Tony Wall yourself 0121 520 2000

 

ATB

 

Si

Edited by zini
Link to post

It should be ok Si buddy......it was a second hand rifle but it did get a tune up before i got it and it was chrono'ed at 11.7 before i left shop with it.....if what you say is correct im going to have to take it back next week and looked at as i dont want it to go above 12 thats for sure.....with its new spring it might well have creeped up

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...