HW100T (anti tamper version)

[RAMCAM 4]

Hi Lads

 

Sent my rifle back to my local gunshop (won't mention any names) due to a leaking regulator, had it back on friday problem solved. Now a new problem has arised, a few months back it was doing 11.8 with baracudas and 11.6 with AA's, now its putting out around 12.4ft/lbs.

[festa 206]

give the rfd a ring and see what he says you'll probably find its within the tolerance of the law otherwise the rfd would not of gave it back to you but id defo check with him 1st

 

atb gary

[RAMCAM 4]

give the rfd a ring and see what he says you'll probably find its within the tolerance of the law otherwise the rfd would not of gave it back to you but id defo check with him 1st

 

atb gary

 

Hi Gary

 

I'll give them a ring in the morning. It maybe in the tolerance range, but I would prefer it to be around 11.8 max.

 

 

Thanks

[Phantom 631]

Hey guy's there is no such thing as "Tolerance" where the law states over 12

 

Tell your RFD you wnat it at no more than 11.5 or as a max 11.75 with the heaviest pellet your likely to use.

 

Lets face it, a 10.5 will; if used correctly will drop any typical quarry out to and even (if your up to it and conditions are good) beyond the nominal "safe range" of 30 to 35.

 

Phantom

[davyt63 1,845]

hi RC

if it was pre AT i could of helped ya out buddy,but its not sorry mate.

give the shop a ring by the way was ya pellets lubed or not?

 

regards

 

davy

[RAMCAM 4]

Hey guy's there is no such thing as "Tolerance" where the law states over 12

 

Tell your RFD you wnat it at no more than 11.5 or as a max 11.75 with the heaviest pellet your likely to use.

 

Lets face it, a 10.5 will; if used correctly will drop any typical quarry out to and even (if your up to it and conditions are good) beyond the nominal "safe range" of 30 to 35.

 

Phantom

 

Hi Phantom

 

It was on the brink before this problem accured. It was 11.8 with baracudas. You are right Phantom I was dropping bunnies at 40 and 50 yards with my 97k, chronoed it today and it was at 10.9ft/lbs.

[RAMCAM 4]

hi RC

if it was pre AT i could of helped ya out buddy,but its not sorry mate.

give the shop a ring by the way was ya pellets lubed or not?

 

regards

 

davy

 

 

Hi Davy

 

No I never lube my pellets. I liked the idea of the anti tamper version because my thoughts were I could never get into any bother with it.

But I do know how to get around it to decrease the power, but this would defeat the object of buying the anti tamper version.