exploded diagram AA400

[kk7966burton 0]

Morning All,

just wondering if anyone knows of a site to get an exploded diagram for the AA400?

I normally take my rifles in to my local gunsmith when it has a problem but times being what they are(I'm skint an tight) I thought I'd try myself.

Its dumping all its air slowly so it can only be a seal can't it?

yours in sport, Burt.

[taff3915 2]

Morning All,

just wondering if anyone knows of a site to get an exploded diagram for the AA400?

I normally take my rifles in to my local gunsmith when it has a problem but times being what they are(I'm skint an tight) I thought I'd try myself.

Its dumping all its air slowly so it can only be a seal can't it?

yours in sport, Burt.

 

sounds like the seal mate, I got the diagram from the users manual that came with the persons rifle, repaired his leak with a bike inner tube. lol he needed it done in a day

[taff3915 2]

http://www.airrifleshop.co.uk/Manuals/AirArmsS400ISS10.pdf Pages 10 , 11, 12 mate

[samuri 4]

check the male snap conector (where you fill it)comon problem. about £8 if it is that. that would be the first place i would check hope that helps samuri

[maty j 6]

What you filling It with, dive bottle or pump. Is It showing 200 bar on the gauge once filled? Where's the air coming out from?

[farmerkev09 104]

http://www.airrifleshop.co.uk/Manuals/AirArmsS400ISS10.pdf Pages 10 , 11, 12 mate

thanks for posting that taff just what i was looking for ie a part number

 

thanks again

 

farmer

[kk7966burton 0]

http://www.airrifleshop.co.uk/Manuals/AirArmsS400ISS10.pdf Pages 10 , 11, 12 mate

Cheers for that Taff,

[kk7966burton 0]

check the male snap conector (where you fill it)comon problem. about £8 if it is that. that would be the first place i would check hope that helps samuri

Checked the connector an no air is passing from that. Cheers though.

[taff3915 2]

Thats ok guys, glad to of helped

[jackinbox99 41]

For the low cost involved, id recomend stripping it down and replacing all the seals anyway. I did mine last year and found it was a very easy job to do. Just need some allen keys.... unless yours is anti-tamper, in which case id leave it to the gunsmith.

[samuri 4]

For the low cost involved, id recomend stripping it down and replacing all the seals anyway. I did mine last year and found it was a very easy job to do. Just need some allen keys.... unless yours is anti-tamper, in which case id leave it to the gunsmith.

 

about £15 from air arms here is the number 01323 845 853