Jump to content

Foz_1983

Members
 View Profile  See their activity

  • Content Count

    45

  • Joined

  • Last visited

 Content Type 

Everything posted by Foz_1983

  1. Foz_1983
    Hi bud and welcome I also shoot around Salisbury too
  2. Foz_1983
    I've got woodies and Crow on my golf course, they keep trying to pinch the balls?
  3. Foz_1983
    Just to put my 10p in I made a set out of two camp poles and some Sniper tape(green material tape) they work a treat and their UBER light, They do until I get the funds for the primos
  4. Foz_1983
    I would say any where between £400-500 that assuming it's coming with a scope. There are some right random prices on Gunstar you could have a look on there
  5. Foz_1983
    GPMG ? However my first was a BSA meteor
  6. Foz_1983
    Alright mate fookung ell, ?
  7. Foz_1983
    Hi it's an .22 ultra SE I've had it for a few months now. I bought it second hand and the guy I bought it off was using AA Diablo hunter and I'm not going to lie they were on the noise, but the tin ran low and I was advised to try the RWS as there were no AA in store so I did I've stripped the gun down and and given it a good clean and pull through, and as I'm only rating at the mo and the range is 20m +or- a 1m I'm happy. But I have been on the range today and it has improved, 50 pellets all through the bull, I even managed to plink a 15mm hole at 37m so I'm happy. But I think I will pro
  8. Foz_1983
    Hi all I was having a drama with my grouping size it went from 10mm to 15-30 mm all at 20 m. I had just pulled the rifle through and I'm trying to find the best pellet so it was a new tin of RWS super domes but even after 30 pellets the inconsistency of the group was sh#te. I spoke to guys at the range and one suggested I wash my pellets, I laughed at first but when I did a bit of reserch actually quite a lot of people do it. I gave it ago and I was surprised at the amount of metal filing were about so here what I did, first of all I emptied the pellets into a culender and washed with w
  9. Foz_1983
    I've got the scorpion on now and I'm now getting about 50-52 decent shot consistency compaired to 27-30 I was getting before. I do plan to up grade the stock to the scorpion, but I've had an idea about getting a 3D printed one I've just got to find a printer that's big enough. I also plan to get an XTX tune and shroud fitted but it's all about saving up!
  10. Foz_1983
    Yes should be a straight swap, and on the same website they sell the air tubes about £60
  11. Foz_1983
    I was thinking about swapping my ultra se stock with the scorpion one for extra length, for the bipod and a scorpion air tube. I was looking on airgunspairs and there's a few , Scorpion-SE-Tactical-Stock-Part-No.-16-7834/. Scorpion-Tactical-Stock-Part-No.-16-6905JKI/ The reason behind the tactical stock is durability, that's all cheers
  12. Foz_1983
    When would you like to meet? I'm free most evenings and some weekends. What's the quary?
  13. Foz_1983
    Sounds promising where abouts are you?
  14. Foz_1983
    I hope this goes well, so I've got this idea that if everyone writes down where there nearest "Filling " point is any one could look on here and find one simple! So after finding out that * APS Marine Centre - Ashby Powerboat School Salisbury*is closed my nearest is *The DiveZone Melksham*is the closest to me
  15. Foz_1983
    Cheers guys
  16. Foz_1983
    Just like to say thanks for all the input I've used the foil method, there is a slight colour change but I can live with it
  17. Foz_1983
    Keep looking you'll find what you want, I spent 3 solid months of researching and browsing different forums until I found my ultra se, like you I've only just upgraded to a pcp and the ultra is very accurate
  18. Foz_1983
    Hi all, so i bought this second hand at a steel, as was after the scorpion but at 350 I couldn't resist. It came with a bag and a Nikko Stirling Mount-master so i was very happy, now here is the only down side the barrel has some pitting on it and the sling loop has some surface rust ans so does the trigger guard. The gun fires well, very well in fact, so I know it works I'm just after some tips on cleaning the rust off and is worth getting the gun serviced? cheers Foz
  19. Foz_1983
    Hello bud, I'm a newbee too
  20. Foz_1983
    Hi to all, I lived in Wilton (a nice little village out side of salisbury) for about 7 years now and the reason I'm on here is to find like minded people in my local area. Im returning to the air gun scene after a few years away, bacillus the last time I picked up an air gun was when I was a child. My firs gun was a cheep Chinese thing, then I got a BSA meteor and I've now just purchased my first PCP a BSA Ultra SE, and I've never mown accuracy like it. What I'm interested in is the hunting part, as I'm due to finish my time in the army I'm looking to get in into pest control when I lea
×
×
  • Create New...