digga1973

thank you for the help sorted now just need to test it out on some targets now

hi after watching the video si of verminhunters tv did on the near and far calibration i decided to try it for my 1.77 hw100 got all the chrono reading and everything all sorted but the question is i use rws superfield pellets that averaged out at 0.550 gram (8.488 grain) but cant find these on the pellet list would rws superdomes be the closest to them ?

nice shot hope its the first of many

that a good idea and would work for some of his ground but know in two of the valleys he shoots in there is no signal on mobiles found this out the other day when was putting a fence up at one of them

hi im after some advice and help on making a remote e caller for foxes been asked by a old guy i know who does fox shooting about a fox caller he was looking at the ICO Tec GC 300 Electronic Call as he has a very limited budget . but with this caller the trouble is where its american so mainly set up for coyote calling there are only a couple of calls on there that you could use for foxes in the uk . so i sujested to him about making one from a mp3 player . he doesnt use computers but i could download the mp3s for him and try sort out the build allready have a old mp3 playe

thanks davy allways nice when it goes to plan want to try find time to calibrate my scope better using chairgun pro liking the hawk panorama with the map 6 reticle just not using it to its full potential at the moment

thanks for the replies hope to get a chance to get out after them again soon or maybe find some rabbits to have a go at

nice shooting will be a help to the song birds

they are a very nice gun but still like going out with my hw90 sometimes now got it fixed . but can never find enough time to get out shooting and will have to try get some more ground to get out and do some lamping

the hw 100 has now acounted for 58 squirrels from that wood but they keep coming back do allot of forestry work as well as fencing and hedgelaying so get allot of chances to take note of the squirrels habbits and behavour making them a bit easier to shoot when i get the time to go shooting that is . dont allways get good numbers and sometimes draw blanks but nice when it does work out a couple more pics of trips out with the hw100

finally got the hw 100 back on form and managed to get out and shoot some more squirrels after work . finished up with 8 and what with the 16 crows i caught in the ladder cage trap a very good day just want to find time now to calibrate my map6 hawk panarama scope with chairgun pro and then get in some more practice

hi after some advice a while ago i noticed the barrel on my hw100 kt had come loss so tightened up the little grub screw seemed fine but since been shooting and the accuracy has gone was wondering if this maybe due to the barrel needing cleaning as never done it and was wondering what is the best way to clean it ? any help would be great full

very nice shooting got the hw100kt in 177 to great rifle must try and find time to get out shooting again soon all work and no play

Hi The screws are accessible on the 100 but the holes are not clear. Have a closer look you will see them and just push a small screw driver in. The rubber has a Memory just like plastic so it swells back to hide the entry holes for the screwdriver but they are there Also the white band on the pad can be used as a template! God luck thanks very much davy for that will have a closer look and have a go

very good video video going to try fit on on my hw100kt once i find out if the old butt pad is glued or screwed on as cant see the screws and dont want to damage anything trying to get it off