Jump to content

sanibel686

Donator
 View Profile  See their activity

  • Content Count

    143

  • Joined

  • Last visited

 Content Type 

Everything posted by sanibel686

  1. sanibel686
    308 wanted to suit left hander, anything considered, bolt lever etc Looking at a budget price range please pm thanks
  2. sanibel686
    Hi I forgot to mention that the Range Rover is taxed and MOT'd untill October
  3. sanibel686
    Reduced to £3500 for a very quick sale!!
  4. sanibel686
    No worries, but I have a budget of £100 to £200 and found it difficult to understand how you thought it would be helpful to me in saying that unless I spent £750 I would buy a load of rubbish. I honestly thought you were "grandstanding" in your original post and I still believe that such comments arn't helpful in sales/ wanted type posts. If anyone has anything please PM me, left handed would also be ok as I am a leftie but don't mind shooting a RH s/a regards
  5. sanibel686
    Price is relative in everything we buy not just guns. It relates to age, condition, the dynamic of supply/demand etc. As a brief example there are 9 section 1 guns on guntrader today for less than £200 and others posted at more than £1000, you know what the difference is? some are newer/more desireable some are older/less desireable. Your comment is not logical or helpful to my wanted ad, and may possibly even have a negative effect. In future you would be wise not to post such comments in wanted/for sale type ads, at almost 1000 posts on this site I would have thought you should be aware of s
  6. sanibel686
    section 1 shotgun wanted north east £100 -£200 please pm if you have anything cheers
  7. sanibel686
    Looking for a multi shot semi auto (not hatsan or webley) looking to pay around £100 to £200 please pm with what you have. Cheers
  8. sanibel686
    Reduced to £3500 for a very quick sale!! 1999 RANGE ROVER 4.0 SE 1999. (T Reg) The car has been owned by my friends rather well off father-in-law for umpteen years as his second vehicle and has completed a very small mileage each year. It has been maintained regardless of expense and has a full Main Dealer Service History, Every item notified at every inspection has always been attended to regardless of cost also by the Main Dealer. Air suspension and steering linkages were replaced at last service at an additional cost of £1500 and also has just had a full stainless steel exhaust system
  9. sanibel686
    lowest price drop
  10. sanibel686
    price reduction
  11. sanibel686
    I have 490 x 16 bore Lyalvale express cartridges for sale (also 2 1/2" long) Mostly sixes but also some fives and some sevens. The lowest price I can find on the internet is £221 per 1000 For the 490 reducing this by 20% = £87 So say £ now £75 now £70 cash & collected please and that is my lowest price, only to cert holders. The 8 bores in the pic are from a previous post and are now sold.
  12. sanibel686
    I recently aquired these cartridges as part of a job lot I have 68, 8 bore cartridges stamped winchester "super x" 25 are in a box marked alan myers, the rest are unboxed I also have around 550 of the 2 1/2" 16 bore shown. There is one 12 bore in the photos for scale I have no idea how to value these 8 bore. The boxed set has £49.50 marked on it. Does anyone have any advice or websites I could look at before I decide on a fair price. many thanks lads
  13. sanibel686
    And I'm the other person speaky is refering to. I offered you your full asking price and a £15 contribution to postage. You told me the gun was mine and for me to give you my address which I did. Then when I tried to arrange payment with you, you emailed me this intellectual masterpiece "i aint gettin rid nw mate k" Yet I see that you have now sold it out from under us both. You embody none of the characteristics that would make for a safe future transaction on this site and I for one will refer others to this thread should I see you trying to sell anything else.
  14. sanibel686
    NOW SOLD THANKYOU This is an english hammer gun with 30" damascus brls chokes measure 0.719 and 0.712 (1/4?). The brls are beautiful swirl damascus which are the crowning glory of the gun, they have a couple of pits toward the muzzle end but nothing at all I would worry about (I bought it to use myself) BP proofed. Action is a little loose. Length of pull is 14 1/4" to front trigger. The forend has a horn tip and the stock has a pronounces tiger stripe (fiddleback) in it. One hammer has been braze repaired and you can see a small repair to the right lock these are both very old repairs and ha
  15. sanibel686
    Hi Acki8e Ive already PM'd my address give me a call mate to sort ourt payment cheers
  16. sanibel686
    Sale agreed
  17. sanibel686
    Hi this was a full sized brand new original stock cut down for my son. It's a total length of 12 3/4 inches including the pad. £30 inc P&P please post in the thread if you want it.
  18. sanibel686
    Read right through the important bit is at the end what do you mean pal Low carbon steel, i.e. steel with about 20 points or less of carbon, cannot be made to harden by heating and quenching, as higher carbon steels can. Low carbon steels are tough, soft and flexible. They wear quickly and batter easily. Many parts, including gun actions in days gone by, were made with low carbon steel. It was cheap, strong and easy to machine. Unfortunately it would not stand up to the battering of use in the field. Case hardening added carbon to the surface skin of the steel part and left it in
  19. sanibel686
    Hi PM with offer
  20. sanibel686
    Thank you for all the interest these are both now sold
  21. sanibel686
    is it one of these?
  22. sanibel686
    That is not colour hardening on the action, someone has just sanded it down and warmed it up randomly with a torch to put some colour on the metal. Shouldnt' be a big problem on a 410 but you should be aware of what you are selling.
  23. sanibel686
    I have two remington 1100's The left handed model is a 28" barrel multi choke with skeet and full chokes. Mechanically it is fine but it has been carried for wildfowling before I owned it and as you can see the finish has worn quite a bit. The right handed 1100 has a 26" skeet barrel and I've fired around 350 rounds through it over the last 14 years. This gun is in excellent condition with near perfect blueing and wood. My camera flash has made a white triangle appear on the stock and various white streaks on the bluing, these are not actually on the gun!! Both guns are 3 shot
  24. sanibel686
    Thank you for all the PM's and interest in the gun it is now sold pending.
  25. sanibel686
    Yes I've seen a few photos of Fred Williams guns identical to this. I think what used to happen back in the old days was a number of the "named" manufacturers used to buy in guns "in the white" engrave their own names on them and charge more for them as a result. I suppose not much has changed when you pay a lot more for a Sabbati if it's been badged as a Browning Citori or McNab Highlander!!
×
×
  • Create New...