ghillies 209 Posted April 16, 2009 Report Share Posted April 16, 2009 (edited) I your looking for least weight you cant beet these things aftera little modification... http://shop.ebay.co.uk/items/_W0QQ_nkwZCRE...fromZR40QQ_mdoZ hers one such bulb unit.. theres regulaters for the one ones that dont have buit in reg's.. '8' rings are all over ebay for 5-6 quid with dilivery... you can bridge the tube on the tacticle torch's or cut um down and atatch two wires for the unltimate in weight loss.. (the cree tacticles are mostly 1 inch bodies..so a 1 inch 8 ring..) you'll want rechargeable CR123's though..or rig up nicads or summut. http://cgi.ebay.co.uk/TERRALUX-CREE-XR-E-L...%3A1|240%3A1318 the LED lenser H7 and h7R do go to the hundred yard mark on full power, theyre dimable and fucusable although the beam does have a spot (handy for centering).. check out the head its self, i cant see a ready made unit any where that's this small for a hundred yard beam unfiltered...with dimmer on the battery pack.. failing that the preverbial 'any dish' that'll hold a 4.8v krypton and give it 6v.. some gaffer tape and wire... for on a gun... or use head lamp. ...... both are ten minute jobes.. the bodies are the negative.. the spring in the end caps conects to the tube and then the bulbn at the other end. presure switch ..on the gun.. ...battery spaning... (splitting head gear to put a lamp on the gun..wow, cut wires and put red to re black to black..its only a bulb.. it's a clue lol... Edited April 16, 2009 by ghillies Quote Link to post
ghillies 209 Posted April 16, 2009 Report Share Posted April 16, 2009 (edited) Hi, folks.I'm having problems with my lamping gear. I use springers, and have tried scope mounted lamps, but I'm fed up with having to re-zero each time I take it off or put it back on. I've been useing a Petzel 5 LED head torch for a while, and it's fine out to 25 yards or so but not enough power for any further. I'm useing a good enough scope, I could use a little help with my lighting problem though...... Cheers. Andy. ahhh your taking the scope off and losing your zero? or losing the light zero? ''put the light on the barrel..'' weight wise...above.. hope it helps Edited April 16, 2009 by ghillies Quote Link to post
ghillies 209 Posted April 16, 2009 Report Share Posted April 16, 2009 (edited) oops i forgot a bit.... put the presure switch wire into the posative (or wat ever switch/dimmer switch you can get) of the battery span (mag lite) and everything else can go in your pocket..batteries etc... posatives the one that goes to the bulb usualy.. or where ever the nipple end of the batteries goes to. Edited April 16, 2009 by ghillies Quote Link to post
ian118118 10 Posted April 16, 2009 Report Share Posted April 16, 2009 just leave the lamp on the gun! byeeeeeeeeeee Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.