daz 0 Posted March 3, 2009 Report Share Posted March 3, 2009 hi a mate of mine bought a new bakial o/u 12b four months ago.he uses it mainly for clays the problem is the carts get stuck( behind)the ejectors and there a xxxx to get back out.they done it with the snap caps all so.does anyone know what the problem could be. cheers daz Quote Link to post
lgray88 4 Posted March 3, 2009 Report Share Posted March 3, 2009 is there any play on the ejectors before you close the gun up with no carts in becuase id think if when the gun was closed loaded and the ejectors could move around slighty the force of the action closing against the cartridges could push them over the lip of the ejector. Quote Link to post
The one 8,597 Posted March 3, 2009 Report Share Posted March 3, 2009 Ive had two bakials and never had a problem there usaully very robust guns ,have you tried a few types of cartridges threw it ?? Quote Link to post
red1 1 Posted March 3, 2009 Report Share Posted March 3, 2009 (edited) is there any play on the ejectors before you close the gun up with no carts in becuase id think if when the gun was closed loaded and the ejectors could move around slighty the force of the action closing against the cartridges could push them over the lip of the ejector. had one for five years gave the same problem ,thier was a little play with the ejectors always had to carry my clesning rods with me to remove spent cartridge .mostly on top barrel :icon_redface:pain in the ass... Edited March 3, 2009 by red1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.