Jump to content

22/250 users


Recommended Posts

hi lads has anyone tryed the 40 gr hornady ammo in there 22/250's ?

 

if so how you find it and what sort of damage does it do ? i guess it wont be as good over longer range as a 50 gr as the wind will get to it ? but up to 200 yards on crows and rabbits :gunsmilie: i bet its good stuff ?

 

i just wanted to no as im picking some up in abit

Link to post

They will smash them to pieces Mate.

 

I have seen them fired through a .223, I assume you mean the V-Max?

 

Dead foxy everytime no messing around. I should think even in the wind, there will not be a huge amount of difference as what you lose in weight you gain in speed, so 250 yards no trouble, and on a still night, whatever distance you want.

 

Regards

SS :thumbs:

 

P.S What have you ordered Moly or Copper jackets?

Link to post
They will smash them to pieces Mate.

 

I have seen them fired through a .223, I assume you mean the V-Max?

 

Dead foxy everytime no messing around. I should think even in the wind, there will not be a huge amount of difference as what you lose in weight you gain in speed, so 250 yards no trouble, and on a still night, whatever distance you want.

 

Regards

SS :thumbs:

 

P.S What have you ordered Moly or Copper jackets?

 

 

had some home loads given me mate there fine 40gr vmax norma brass and varget powder. the only thing is im a little funny about using them as the load is pretty hot so it will be at the high end on the fps scale ! and i guss to many isnt going to do the barrel to good ! as the jackets im not sure can you tell ? you mean the bt end if so its moly

Link to post

The copper Jacketed ones look like normal everyday bullets.

 

The Moly's look Black/Dark Grey.

 

Has the load been developed for your Rifle? I mean has the load been started at the minimum load of powder and worked up?

 

If not then I suggest you don't shoot them as you never know, but best to err on the side of caution IMO.

 

Regards

SS :thumbs:

Link to post
The copper Jacketed ones look like normal everyday bullets.

 

The Moly's look Black/Dark Grey.

 

Has the load been developed for your Rifle? I mean has the load been started at the minimum load of powder and worked up?

 

If not then I suggest you don't shoot them as you never know, but best to err on the side of caution IMO.

 

Regards

SS :thumbs:

 

the cases have been full length resized but like you said the load hasnt been made up for my rifle and it is on the high side so i mite dismantle them and get them redone with less charge.

 

i have some 53 gr barnes bullets to with 35.5 gr varget. im going to give them a go as its not a very hot load so should be fine in my rifle.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...