jultaylor1972 2 Posted April 8, 2008 Report Share Posted April 8, 2008 Does any one know how to take the gas bottles out and load new ones. There seems to be one in and I cant get it out? Quote Link to post Share on other sites
stubby 175 Posted April 8, 2008 Report Share Posted April 8, 2008 hi jules, is it the one with the little bottle, sometimes they need a little tap/knock/ to loosen them off the piecing bit Quote Link to post Share on other sites
Ballybricken 1 Posted April 8, 2008 Report Share Posted April 8, 2008 If a little tap dont work try cocking it and firing it with the barrel aimed to the ground sometimes that jerks them out if that failed .. make sure the bulbs empty then drill into it and pull it out there a real pain in the arse for doing this, best way to avoid it is to put a dab of oil on the top of the CO2 bulbs before putting them in , the crosman ones are apparently already lubed up but even still ive had them stick Quote Link to post Share on other sites
Malt 379 Posted April 8, 2008 Report Share Posted April 8, 2008 If it's the standard ratcatcher, it will be hard to unscrew the cap if there's any pressure left in the cylinder. Quote Link to post Share on other sites
jultaylor1972 2 Posted April 8, 2008 Author Report Share Posted April 8, 2008 after a bit of fiddling around I fired the trigger and managed to get it out!! thanks guys!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.