charging problem

[davyt63 1,842]

hi can anyone help

i have been filling my aas410 up to 190 .

but when it drops to 100 bar can only top up to 180 just under. is this a problem or am i doing some thing wrong

filling as described in aa manul. would appreciate any feedback or comments

many thanks

 

davy

[AIRGUNNER 1]

It will slowly go down davy as the air in the divers bottle is getting used

[davyt63 1,842]

It will slowly go down davy as the air in the divers bottle is getting used

cheers twat im sorry airgunna lol

 

davy

[Stevenobrien1 0]

Hi Davy,

 

As you decant from your charging bottle whether it be a 3ltr or larger you will lose about 5 - 10bar from the charging bottle each fill, another tip is also to decant very slowly whilst the buddy bottle is sitting in cold water the cooler you can keep the cylinder whilst charging the higher the pressure will be, so just check that your charging cylinder is filled to its max work pressure, cheers steve

[ace32 4]

hiya davy,plus you will lose pressure qucker if your only useing a 232 bar dive bottle as aposed to a 300 bar,ie 10 fills rather than 15,especially if your useing a 3 ltr job,cheers,atb,ian

[davyt63 1,842]

hiya davy,plus you will lose pressure qucker if your only useing a 232 bar dive bottle as aposed to a 300 bar,ie 10 fills rather than 15,especially if your useing a 3 ltr job,cheers,atb,ian

thanks lads

 

davy