BenBhoy 4,706 Posted December 20, 2021 Report Share Posted December 20, 2021 Just wondering if anyone has fitted a quick fill to an old buddy bottle? BSA/Theoben Quick Fill Upgrade – Best Fittings WWW.BESTFITTINGS.CO.UK My .177 super10 is lovely & accurate and clears things up around yard, but it's pain in the hole to fill. Is this a straight job of removing valve on bottle (which I've done before) and simply screw quick fill in? Cheers Ben Quote Link to post
Dervburner 2,548 Posted December 20, 2021 Report Share Posted December 20, 2021 (edited) 4 hours ago, BenBhoy said: Just wondering if anyone has fitted a quick fill to an old buddy bottle? BSA/Theoben Quick Fill Upgrade – Best Fittings WWW.BESTFITTINGS.CO.UK My .177 super10 is lovely & accurate and clears things up around yard, but it's pain in the hole to fill. Is this a straight job of removing valve on bottle (which I've done before) and simply screw quick fill in? Cheers Ben I fitted a Dr Bobs quick fill to my rapid. You remove the valve from the bottle and fit the quick fill assembly to the gun where the bottle used to screw in, then screw the bottle into the new filler/gauge assembly. I needed to cut a hole in the stock for the new inlet as it’s an in-line fill and gauge. V configuration are available as well for the rapids, not sure about bsa’s? Simple enough job Ben. If you get one and you aren’t confident fitting it let me know. just seen the link, even easier than I thought then Edited December 20, 2021 by Dervburner 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.